MANUALE UTENTE – USER’S MANUAL CSE06T Diffusore da soffitto in metallo – Iron ceiling speaker
1
1. PRECAUZIONI D’USO ............................................................................. 3 2. DESCRIZIONE......................................................................................... 3 3. INSTALLAZIONE ..................................................................................... 4 4. CARATTERISTICHE TECNICHE ..............................................................
1. PRECAUZIONI D’USO ATTENZIONE Per evitare il rischio di shock elettrico non aprire il prodotto. Per prevenire rischi di incendio o di scosse elettriche non esporre questo apparecchio a pioggia e umidità. • • • • • • • • • • • • Prima di procedere con l’installazione, leggere attentamente le istruzioni contenute nel presente manuale e conservarlo per una consultazione successiva. Attenzione: l’installazione errata potrebbe danneggiare irrimediabilmente l’apparecchiatura.
3. INSTALLAZIONE 1. Praticare un foro di diametro di 170 mm sul pannello del soffitto, nel punto dove andrà posizionato il CSE06T. 2. La potenza d’uscita viene selezionata collegando opportunamente la linea di segnale al morsetto d’ingresso facendo riferimento alla seguente tabella dei colori: NERO ROSSO BIANCO COMUNE 6W 3W 3.
1. SAFETY INSTRUCTIONS ........................................................................ 6 2. DESCRIPTION......................................................................................... 6 3. INSTALLATION ........................................................................................ 7 4. TECHNICAL SPECIFICATIONS ................................................................
1. SAFETY INSTRUCTIONS WARNING To reduce the risk of electric shock do not open this unit. To prevent fire or shock hazard do not expose this unit to rain or moisture. • • • • • • • • • • • • Before installing the unit, carefully read these instructions and keep them for future reference. Warning: Improper installation might cause irreparable damage to the unit. Installation should be carried out in compliance with the relevant safety regulations.
3. INSTALLATION 1. Make a 170mm Ø hole in the ceiling panel, where the CSE06T is to be positioned. 2. Output power is selected connecting signal line to the input terminal, according to the following colour table: BLACK RED WHITE COMMON 6W 3W 3. Once the electrical connection has been completed, lift the three spring clips, insert the CSE06T unit into the cut hole and gently pull the spring clips upwards to release them. 4.
Note _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ __________________________
_______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________ _______________________________
10
PROEL S.p.A (World Headquarters - Factory) Via alla Ruenia 37/43 64027 Sant’Omero (Te) – Italy Tel: +39 0861 81241 Fax: +39 0861 887862 E-mail: info@proelgroup.
