User Manual

6
3 TREBLE
The TREBLE control is used to adjust the high frequency band. The treble range is -10 dB to +10 dB.
Turning the knob to the right boosts the corresponding frequency band, while turning to the left
attenuates the band.
4 BASS
The BASS control is used to adjust the low frequency band. The bass range is -10 dB to +10 dB. Turning
the knob to the right boosts the corresponding frequency band, while turning to the left attenuates the
band.
5 INPUT 1
Level control of the signal connected to the input 1, which can be either a microphone or a line level
devise (see further).
6 INPUT 2
Level control of signal connected to the input 2, which can be either a microphone or a line level devise
(see further).
7 AUX
Level control of signal connected to the AUX input.
8 INPUT 1
Balanced or unbalanced input on 3.5mm pitch Euroblock connector.
This input can be used to connect low impedance dynamic microphones (30-600 ohm), condenser
microphones with phantom power supply and audio sources with line level signal output (e.g. radio
tuners, television receivers, media players, etc.).
a) Connection of a Balanced line to the INPUT:
b) Connection of a Unbalanced line to the INPUT: