User`s manual

21
MenuSystemOverview
Belowisanoverviewofthemenusystem–alotoffunctionshavebeenassignedmenushortcuts–theseareaccessibledirectlyfromthedefaultscreenby
pressingMENUfollowedbytheappropriateMUTEorEDITbuttonasshown.Thistableonly showsthetoplevel ofeachmenuitem–someofthes
ewillstart
wizardsoraccessadditionalfunctions,andthesewillbeexplainedinlatersections.NotethatcurrentlythemenushortcutsonlyapplytotheDP448.

Tojumpbacktothelastmenuitemaccesseddirectlyfromthedefaultscreen,pressMENU three(3)times–firstpressisin
tomenus,secondisajumptothe
sub‐menu,thirdistotheitem…

GLOBAL
MEMORY
INPUT SECTION CROSSOVER SYSTEM SECURITY AES/EBU
Recall a Memory
Input Ganging Design a Crossover
System Status Unit Locking Output Selection
Store a Memory
Input Reset Crossover Ganging
LCD Contrast AES Status Info.
Erase a Memory LED Brightness
Temperature Alarm
Wake-up Time
Output Meters
Filter Q/Bandwidth
Delay Time/Dist’nce
Clip LED Hold Time
Set Date & Time

Notethatifnoactionistakeninmenumode,theunitwill returntonormal‘default’modeafterabouttwenty(20)seconds..Repeattheabovedirectionsto
returntomenumode.