User`s manual

Ganging=Free Assign [choose ganging]

Ganging=1+2+3+4+5+6+7+8 [1 x 8 way]

Ganging=1+5 2+6 3+7 4+8 [4 x 2 way]

Ganging=1+3+5+7 2+4+6+8 [2 x 4 way]

Selecting Free Assign and then pressing ENTER will begin the process of ganging

outputs together using the following simple rules:

 All outputs are ganged to the lowest number – so to gang 3 & 5, 5 must be

selected and then ganged to 3.

 Outputs cannot share more than one ganging set – so for example output 3 cannot

be ganged to 2 and 4 unless they are ganged together as well. (Effectively 3 and 4

are ganged to 2 in this case)





Withtheserulesinmind,selectingandsettingupgangsisquitestraightforward.

PressaMUTEkeytochoosetheoutputtogang–itsLEDwillbegintoflash,andanEDITkeywillilluminateto

showwhichoutputitiscurrentlygangedwith.Tochangethisselection,justpr

essanotherEDITkey,

rememberingthatgangsworkfromthehighesttolowestnumber.So,togangoutputs1and5,pressMUTE

5thenEDIT1–thedisplaywillshow

<-Crossover Ganging

Gang Output 5 with 1



GangingisclearedbyselectingGanging=None fromtheinitialchoicesgivenabove.The Input

Ganging procedureisidenticaltothecrossoverganging,selectableunderthe Input Sub-Menu.