User Manual
Table Of Contents
- DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT
- GENERAL SAFETY INSTRUCTIONS
- IN CASE OF FAULT
- PACKAGING, SHIPPING AND COMPLAINT
- WARRANTY AND PRODUCTS RETURN
- MAINTENANCE AND DISCLAIMER
- POWER SUPPLY
- CONFORMITY
- INTRODUCTION
- DESCRIPTION
- INSTRUCTIONS
- 1. MIC-XLR / LINE-JACK combo input (ch. 1 ÷ 8)
- 2. LO CUT switch (ch. 1 ÷ 8)
- 3. CHANNEL GAIN control (ch. 1 ÷ 8 / 9 ÷ 16)
- 4. COMP compressor control (ch. 1 ÷ 8)
- 5. COMP indicator (ch. 1 ÷ 8)
- 6. EQ section HIGH control (ch. 1 ÷ 8 / 9 ÷ 16)
- 7. EQ section MID LEVEL control (ch. 1 ÷ 8)
- 8. EQ section FREQ control (ch. 1 ÷ 8)
- 9. EQ section LOW control (ch. 1 ÷ 8 / 9 ÷ 16)
- 10. AUX 1 control (pre) (ch. 1 ÷ 8 / 9 ÷ 16)
- 11. AUX 2 control (pre) (ch. 1 ÷ 8 / 9 ÷ 16)
- 12. AUX 3 send control (pre/post) (ch. 1 ÷ 8 / 9 ÷ 16)
- 13. POST switch (ch. 1 ÷ 8 / 9 ÷ 16)
- 14. AUX4/FX send control (ch. 1 ÷ 8 / 9 ÷ 16)
- 15. PAN control (ch. 1 ÷ 8)
- 16. MUTE switch/LED (ch. 1 ÷ 8 / 9 ÷ 16)
- 17. MIX switch (ch. 1 ÷ 8 / 9 ÷ 16)
- 18. 1-2 switch (ch. 1 ÷ 8 / 9 ÷ 16)
- 19. PEAK/PFL detector (ch. 1 ÷ 8 / 9 ÷ 16)
- 20. PFL switch (ch. 1 ÷ 8 / 9 ÷ 16)
- 21. CHANNEL FADER level control (ch. 1 ÷ 8 / 9 ÷ 16)
- 22. MIC-XLR / LINE-JACK L MONO combo input (ch. 9 ÷ 16)
- 23. LINE-JACK R Input (ch. 10 / 12 / 14 / 16)
- 24. EQ section MID control (ch. 9 ÷ 16)
- 25. BAL control (ch. 9 ÷ 16)
- 26. FX PRESETS selector
- 27. FX DISPLAY number
- 28. EFFECT MUTE button
- 29. FX MUTE pedal jack input
- 30. EFFECT PEAK/MUTE detector
- 31. FX FADER level control
- 32. 2TRK inputs
- 33. USB/2TRK IN level control
- 34. MIX - CH15/16 switch
- 35. USB/2TRK OUT level control
- 36. 2 TRK OUT PEAK detector
- 37. MIX - AUX 1-2 switch
- 38. 2TRK outputs
- 39. AUX 1 SEND level control
- 40. AUX 1 SEND jack output
- 41. AUX 2 SEND level control
- 42. AUX 2 SEND jack output
- 43. AUX 3 SEND level control
- 44. AUX 3 SEND jack output
- 45. AUX 4 / FX SEND level control
- 46. AUX 4 SEND jack output
- 47. GROUPS 1-2 FADER level control
- 48. GROUPS 1-2 jack output
- 49. GROUP TO MIX switch
- 50. MAIN MIX to C.ROOM switch
- 51. GROUP 1-2 to C.ROOM switch
- 52. 2TRK to C.ROOM switch
- 53. PHONES level control
- 54. PHONES stereo jack output
- 55. C.ROOM level control
- 56. C.ROOM L & R jack output
- 57. PFL ACTIVE LED
- 58. L & R LEVEL meters
- 59. MAIN MIX FADER level control
- 60. MAIN MIX L & R XLR output balanced
- 61. MAIN MIX L & R jack output balanced
- 62. +48V phantom switch and LED
- 63. ON LED
- 64. USB PORT socket
- 65. POWER switch
- 66. AC~ socket
- 67. FUSE holder
- TECHNICAL SPECIFICATION
- TRATTAMENTO DEL DISPOSITIVO ELETTRICO OD ELETTRONICO A FINE VITA
- AVVERTENZE PER LA SICUREZZA
- IN CASO DI GUASTO
- IMBALLAGGIO, TRASPORTO E RECLAMI
- GARANZIE E RESI
- MANUTENZIONE E LIMITAZIONI D’USO
- ALIMENTAZIONE
- CONFORMITÀ CE
- INTRODUZIONE
- DESCRIZIONE
- ISTRUZIONI
- 1. MIC-XLR / LINE-JACK ingresso combo (c. 1 ÷ 8)
- 2. LO CUT filtro elimina bassi (c. 1 ÷ 8)
- 3. GAIN controllo guadagno (c. 1 ÷ 8 / 9 ÷ 16)
- 4. COMP controllo compressore (c. 1 ÷ 8)
- 5. COMP indicatore compressione attiva (c. 1 ÷ 8)
- 6. EQ HI equalizzatore controllo alti (c. 1 ÷ 8 / 9 ÷ 16)
- 7. EQ MID eq. controllo intensità medi (c. 1 ÷ 8)
- 8. EQ FREQ eq. controllo frequenza medi (c. 1 ÷ 8)
- 9. EQ LOW equalizzatore controllo bassi (c. 1 ÷ 8 / 9 ÷ 16)
- 10. AUX 1 controllo mandata pre-fader (c. 1 ÷ 8 / 9 ÷ 16)
- 11. AUX 2 controllo mandata pre-fader (c. 1 ÷ 8 / 9 ÷ 16)
- 12. AUX 3 controllo mandata pre-fader (c. 1 ÷ 8 / 9 ÷ 16)
- 13. POST tasto post fader (c. 1 ÷ 8 / 9 ÷ 16)
- 14. AUX4/FX controllo mandata (c. 1 ÷ 8 / 9 ÷ 16)
- 15. PAN controllo panoramico (c. 1 ÷ 8 / 9 ÷ 16)
- 16. MUTE tasto/LED (c. 1 ÷ 8 / 9 ÷ 16)
- 17. MIX tasto assegnazione al MAIN MIX (c. 1 ÷ 8 / 9 ÷ 16)
- 18. 1-2 tasto assegnazione a GROUPS 1-2 (c. 1 ÷ 8 / 9 ÷ 16)
- 19. PEAK/PFL rilevatore di picco e PFL (c. 1 ÷ 8 / 9 ÷ 16)
- 20. PFL tasto attivazione preascolto (c. 1 ÷ 8 / 9 ÷ 16)
- 21. FADER LEVEL controllo di livello del canale (c. 1 ÷ 8 / 9 ÷ 16)
- 22. MIC-XLR / LINE-JACK L MONO ingresso combo (c. 9 ÷ 16)
- 23. LINE R ingresso linea (c. 9 ÷ 16)
- 24. EQ MID equalizzatore controllo medi (c. 9 ÷ 16)
- 25. BAL controllo bilanciamento (c. 9 ÷ 16)
- 26. PRESETS selettore effetto
- 27. FX DISPLAY number
- 28. MUTE tasto per silenziare l'effetto
- 29. FX MUTE ingresso jack per pedale
- 30. PEAK/MUTE LED rilevatore di picco e mute
- 31. FX FADER controllo livello effetto
- 32. 2TRK IN ingressi RCA stereo
- 33. USB / 2TRK IN LEVEL controllo di livello
- 34. MIX / CH15/16 tasto assegnazione USB/2TRK IN
- 35. USB / 2TRK OUT LEVEL controllo di livello
- 36. PEAK rilevatore di picco uscita USB/2TRK OUT
- 37. MIX - AUX 1-2 assegnazione USB/2TRK OUT
- 38. 2TRK OUT uscite RCA stereo
- 39. AUX 1 SEND livello uscita ausiliario 1
- 40. AUX SEND 1 uscita jack ausiliaria 1
- 41. AUX 2 SEND livello uscita ausiliario 2
- 42. AUX SEND 2 uscita jack ausiliaria 2
- 43. AUX 3 SEND livello uscita ausiliario 3
- 44. AUX SEND 3 uscita jack ausiliaria 3
- 45. AUX 4 / FX SEND livello uscita AUX4 e ingresso FX
- 46. AUX 4 SEND uscita jack ausiliaria 4
- 47. GROUPS 1-2 FADER controllo livello uscite GROUPS 1-2
- 48. GROUPS 1-2 jack di uscita
- 49. GROUP TO MIX tasto assegnazione GROUPS 1-2 al MIX
- 50. MAIN MIX a C.ROOM selettore MAIN MIX
- 51. GROUP 1-2 a C.ROOM selettore GROUPS 1-2
- 52. USB/2TRK a C.ROOM selettore USB/2TRK IN
- 53. PHONES livello uscita cuffia
- 54. PHONES uscita jack stereo per cuffia
- 55. C.ROOM livello uscita
- 56. C.ROOM L & R uscite jack control room
- 57. PFL ACTIVE LED indicatore PFL attivo
- 58. L & R LEVEL METERS indicatori di livello
- 59. MAIN MIX livello uscita MIX
- 60. MAIN MIX L & R uscite XLR bilanciate
- 61. MAIN MIX L & R uscite jack bilanciate
- 62. +48V interruttore e LED alimentazione phantom
- 63. ON indicatore LED acceso/spento
- 64. USB PORT (presa USB)
- 65. POWER interruttore di accensione
- 66. AC~ presa di alimentazione di rete
- 67. FUSE portafusibili
- SPECIFICHE TECNICHE
- Mechanical Dimensions – Dimensioni Meccaniche
- Configurations Example – Esempio Configurazioni
- Accessories – Accessori
- Connectors - Connettori
4
DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT
This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life. To prevent possible harm to the
enviroment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for environmentally safe
recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
GENERAL SAFETY INSTRUCTIONS
• CAUTION - Before using this product read carefully the following safety instructions. Take a look of this
manual entirely and preserve it for future reference. When using any electric product, basic precautions
should always be taken, including the following:
• To reduce the risk, close supervision is necessary when the product is used near children.
• Protect the apparatus from atmospheric agents and keep it away from water, rain and high humidity places.
• This product should be site away from heat sources such as radiators, lamps and any other device that generate heat.
• Care should be taken so that objects and liquids do not go inside the product.
• The product should be connected to a power supply only of the type described on the operating
instructions or as marked on the product.
IN CASE OF FAULT
• In case of fault or maintenance this product should be inspected only by qualified service personnel when:
• Liquids have spilled inside the product.
• The product has fallen and been damaged.
• The product does not appear to operate normally or exhibits a marked change in performance.
• Do not operate on the product, it has no user-serviceable parts inside.
• Refer servicing to an authorized maintenance center.
PACKAGING, SHIPPING AND COMPLAINT
• This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the unit
conditions immediately after unpacking it.
• If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspection.
• Proel is not responsible for any damage that occurs during shipment.
• Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer.
• Possible damages to unit should be immediately notified to forwarder. Each complaint for manumitted
package should be done within eight days from product receipt.
WARRANTY AND PRODUCTS RETURN
• Proel products have operating warranty and comply their specifications, as stated by manufacturer.
• Proel warrants all materials, workmanship and proper operation of this product for a period of two years
from the original date of purchase. If any defects are found in the materials or workmanship or if the
product fails to function properly during the applicable warranty period, the owner should inform about
these defects the dealer or the distributor, providing receipt or invoice of date of purchase and defect










