User Manual
Table Of Contents
- DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT
- GENERAL SAFETY INSTRUCTIONS
- IN CASE OF FAULT
- PACKAGING, SHIPPING AND COMPLAINT
- WARRANTY AND PRODUCTS RETURN
- MAINTENANCE AND DISCLAIMER
- POWER SUPPLY
- CONFORMITY
- INTRODUCTION
- DESCRIPTION
- INSTRUCTIONS
- 1. MIC-XLR / LINE-JACK combo input (ch. 1 ÷ 8)
- 2. LO CUT switch (ch. 1 ÷ 8)
- 3. CHANNEL GAIN control (ch. 1 ÷ 8 / 9 ÷ 16)
- 4. COMP compressor control (ch. 1 ÷ 8)
- 5. COMP indicator (ch. 1 ÷ 8)
- 6. EQ section HIGH control (ch. 1 ÷ 8 / 9 ÷ 16)
- 7. EQ section MID LEVEL control (ch. 1 ÷ 8)
- 8. EQ section FREQ control (ch. 1 ÷ 8)
- 9. EQ section LOW control (ch. 1 ÷ 8 / 9 ÷ 16)
- 10. AUX 1 control (pre) (ch. 1 ÷ 8 / 9 ÷ 16)
- 11. AUX 2 control (pre) (ch. 1 ÷ 8 / 9 ÷ 16)
- 12. AUX 3 send control (pre/post) (ch. 1 ÷ 8 / 9 ÷ 16)
- 13. POST switch (ch. 1 ÷ 8 / 9 ÷ 16)
- 14. AUX4/FX send control (ch. 1 ÷ 8 / 9 ÷ 16)
- 15. PAN control (ch. 1 ÷ 8)
- 16. MUTE switch/LED (ch. 1 ÷ 8 / 9 ÷ 16)
- 17. MIX switch (ch. 1 ÷ 8 / 9 ÷ 16)
- 18. 1-2 switch (ch. 1 ÷ 8 / 9 ÷ 16)
- 19. PEAK/PFL detector (ch. 1 ÷ 8 / 9 ÷ 16)
- 20. PFL switch (ch. 1 ÷ 8 / 9 ÷ 16)
- 21. CHANNEL FADER level control (ch. 1 ÷ 8 / 9 ÷ 16)
- 22. MIC-XLR / LINE-JACK L MONO combo input (ch. 9 ÷ 16)
- 23. LINE-JACK R Input (ch. 10 / 12 / 14 / 16)
- 24. EQ section MID control (ch. 9 ÷ 16)
- 25. BAL control (ch. 9 ÷ 16)
- 26. FX PRESETS selector
- 27. FX DISPLAY number
- 28. EFFECT MUTE button
- 29. FX MUTE pedal jack input
- 30. EFFECT PEAK/MUTE detector
- 31. FX FADER level control
- 32. 2TRK inputs
- 33. USB/2TRK IN level control
- 34. MIX - CH15/16 switch
- 35. USB/2TRK OUT level control
- 36. 2 TRK OUT PEAK detector
- 37. MIX - AUX 1-2 switch
- 38. 2TRK outputs
- 39. AUX 1 SEND level control
- 40. AUX 1 SEND jack output
- 41. AUX 2 SEND level control
- 42. AUX 2 SEND jack output
- 43. AUX 3 SEND level control
- 44. AUX 3 SEND jack output
- 45. AUX 4 / FX SEND level control
- 46. AUX 4 SEND jack output
- 47. GROUPS 1-2 FADER level control
- 48. GROUPS 1-2 jack output
- 49. GROUP TO MIX switch
- 50. MAIN MIX to C.ROOM switch
- 51. GROUP 1-2 to C.ROOM switch
- 52. 2TRK to C.ROOM switch
- 53. PHONES level control
- 54. PHONES stereo jack output
- 55. C.ROOM level control
- 56. C.ROOM L & R jack output
- 57. PFL ACTIVE LED
- 58. L & R LEVEL meters
- 59. MAIN MIX FADER level control
- 60. MAIN MIX L & R XLR output balanced
- 61. MAIN MIX L & R jack output balanced
- 62. +48V phantom switch and LED
- 63. ON LED
- 64. USB PORT socket
- 65. POWER switch
- 66. AC~ socket
- 67. FUSE holder
- TECHNICAL SPECIFICATION
- TRATTAMENTO DEL DISPOSITIVO ELETTRICO OD ELETTRONICO A FINE VITA
- AVVERTENZE PER LA SICUREZZA
- IN CASO DI GUASTO
- IMBALLAGGIO, TRASPORTO E RECLAMI
- GARANZIE E RESI
- MANUTENZIONE E LIMITAZIONI D’USO
- ALIMENTAZIONE
- CONFORMITÀ CE
- INTRODUZIONE
- DESCRIZIONE
- ISTRUZIONI
- 1. MIC-XLR / LINE-JACK ingresso combo (c. 1 ÷ 8)
- 2. LO CUT filtro elimina bassi (c. 1 ÷ 8)
- 3. GAIN controllo guadagno (c. 1 ÷ 8 / 9 ÷ 16)
- 4. COMP controllo compressore (c. 1 ÷ 8)
- 5. COMP indicatore compressione attiva (c. 1 ÷ 8)
- 6. EQ HI equalizzatore controllo alti (c. 1 ÷ 8 / 9 ÷ 16)
- 7. EQ MID eq. controllo intensità medi (c. 1 ÷ 8)
- 8. EQ FREQ eq. controllo frequenza medi (c. 1 ÷ 8)
- 9. EQ LOW equalizzatore controllo bassi (c. 1 ÷ 8 / 9 ÷ 16)
- 10. AUX 1 controllo mandata pre-fader (c. 1 ÷ 8 / 9 ÷ 16)
- 11. AUX 2 controllo mandata pre-fader (c. 1 ÷ 8 / 9 ÷ 16)
- 12. AUX 3 controllo mandata pre-fader (c. 1 ÷ 8 / 9 ÷ 16)
- 13. POST tasto post fader (c. 1 ÷ 8 / 9 ÷ 16)
- 14. AUX4/FX controllo mandata (c. 1 ÷ 8 / 9 ÷ 16)
- 15. PAN controllo panoramico (c. 1 ÷ 8 / 9 ÷ 16)
- 16. MUTE tasto/LED (c. 1 ÷ 8 / 9 ÷ 16)
- 17. MIX tasto assegnazione al MAIN MIX (c. 1 ÷ 8 / 9 ÷ 16)
- 18. 1-2 tasto assegnazione a GROUPS 1-2 (c. 1 ÷ 8 / 9 ÷ 16)
- 19. PEAK/PFL rilevatore di picco e PFL (c. 1 ÷ 8 / 9 ÷ 16)
- 20. PFL tasto attivazione preascolto (c. 1 ÷ 8 / 9 ÷ 16)
- 21. FADER LEVEL controllo di livello del canale (c. 1 ÷ 8 / 9 ÷ 16)
- 22. MIC-XLR / LINE-JACK L MONO ingresso combo (c. 9 ÷ 16)
- 23. LINE R ingresso linea (c. 9 ÷ 16)
- 24. EQ MID equalizzatore controllo medi (c. 9 ÷ 16)
- 25. BAL controllo bilanciamento (c. 9 ÷ 16)
- 26. PRESETS selettore effetto
- 27. FX DISPLAY number
- 28. MUTE tasto per silenziare l'effetto
- 29. FX MUTE ingresso jack per pedale
- 30. PEAK/MUTE LED rilevatore di picco e mute
- 31. FX FADER controllo livello effetto
- 32. 2TRK IN ingressi RCA stereo
- 33. USB / 2TRK IN LEVEL controllo di livello
- 34. MIX / CH15/16 tasto assegnazione USB/2TRK IN
- 35. USB / 2TRK OUT LEVEL controllo di livello
- 36. PEAK rilevatore di picco uscita USB/2TRK OUT
- 37. MIX - AUX 1-2 assegnazione USB/2TRK OUT
- 38. 2TRK OUT uscite RCA stereo
- 39. AUX 1 SEND livello uscita ausiliario 1
- 40. AUX SEND 1 uscita jack ausiliaria 1
- 41. AUX 2 SEND livello uscita ausiliario 2
- 42. AUX SEND 2 uscita jack ausiliaria 2
- 43. AUX 3 SEND livello uscita ausiliario 3
- 44. AUX SEND 3 uscita jack ausiliaria 3
- 45. AUX 4 / FX SEND livello uscita AUX4 e ingresso FX
- 46. AUX 4 SEND uscita jack ausiliaria 4
- 47. GROUPS 1-2 FADER controllo livello uscite GROUPS 1-2
- 48. GROUPS 1-2 jack di uscita
- 49. GROUP TO MIX tasto assegnazione GROUPS 1-2 al MIX
- 50. MAIN MIX a C.ROOM selettore MAIN MIX
- 51. GROUP 1-2 a C.ROOM selettore GROUPS 1-2
- 52. USB/2TRK a C.ROOM selettore USB/2TRK IN
- 53. PHONES livello uscita cuffia
- 54. PHONES uscita jack stereo per cuffia
- 55. C.ROOM livello uscita
- 56. C.ROOM L & R uscite jack control room
- 57. PFL ACTIVE LED indicatore PFL attivo
- 58. L & R LEVEL METERS indicatori di livello
- 59. MAIN MIX livello uscita MIX
- 60. MAIN MIX L & R uscite XLR bilanciate
- 61. MAIN MIX L & R uscite jack bilanciate
- 62. +48V interruttore e LED alimentazione phantom
- 63. ON indicatore LED acceso/spento
- 64. USB PORT (presa USB)
- 65. POWER interruttore di accensione
- 66. AC~ presa di alimentazione di rete
- 67. FUSE portafusibili
- SPECIFICHE TECNICHE
- Mechanical Dimensions – Dimensioni Meccaniche
- Configurations Example – Esempio Configurazioni
- Accessories – Accessori
- Connectors - Connettori
12
36. 2 TRK OUT PEAK detector
When the peak LED flashes, that means that the signal is too high, near to the clipping of the output stage. In
this case, reduce the level of the USB/2TRK OUT level control.
37. MIX - AUX 1-2 switch
This switch selects which signal is sent to the 2TRK OUT and to the USB port. Choosing the MAIN MIX signal
you can record a whole mix session such as a live performance. Choosing AUX 1-2 you can record two
different instruments in two different tracks of your DAW recording software, routing them thru AUX 1 and
AUX 2 respectively and using the MAIN MIX for monitoring.
38. 2TRK outputs
Use these unbalanced RCA connectors to send out the MAIN MIX or AUX 1/2 signals to a recorder, such as an
analog tape or an A/D converter connected to a Personal Computer.
39. AUX 1 SEND level control
It adjusts the general level of the AUX 1 SEND output. This control ranges from off to +15 dB of gain when
fully clockwise.
40. AUX 1 SEND jack output
This jack connector sends out the line-level signal made up of the sum of the input channel’s AUX 1 sends,
usually for connecting to the inputs of an external effect devices or a stage monitor.
41. AUX 2 SEND level control
It adjusts the general level of the AUX 2 SEND output. This control ranges from off to +15 dB of gain when
fully clockwise.
42. AUX 2 SEND jack output
This jack connector sends out the line-level signal made up of the sum of the input channel’s AUX 2 sends,
usually for connecting to the inputs of an external effect devices or a stage monitor.
43. AUX 3 SEND level control
It adjusts the general level of the AUX 3 SEND output. This control ranges from off to +15 dB of gain when
fully clockwise.
44. AUX 3 SEND jack output
This jack connector sends out the line-level signal made up of the sum of the input channel’s AUX 3 sends,
usually for connecting to the inputs of an external effect devices or a stage monitor.
45. AUX 4 / FX SEND level control
It adjusts the master level of AUX4 jack output and also the signal sent to internal effect. Use it to reduce the
level of signal sent to the internal effect if the PEAK LED is flashing. This control ranges from off to 15 dB of
extra gain (fully clockwise).
46. AUX 4 SEND jack output
This jack connector sends out unbalanced line-level signals made of the sum of the input channel’s AUX 4
sends, usually for connecting to the inputs of an external effect device or a stage monitor. This signal is post-
fader, or in other words it depends on the position of the channel’s FADER.