User Manual

5
MODEL FLASH15A V2 MODELLO FLASH15A V2
System type 2-way vented Sistema 2 vie bass-reex
High Frequency Device 1’’ compression driver with aluminium voice coil Altoparlante al driver a compressione 1" con bobina in alluminio
Low Frequency Device 15” woofer with 2.5"VC Altoparlante bassi woofer 15" - 2.5" VC
Angular Coverage 90° H x 60° V Copertura angolare 90° H x 60° V
Frequency Response 45 Hz - 20 kHz Risposta in Frequenza 50 Hz - 20 kHz
Crossover Frequency 2100 Hz Frequenza Crossover 2100 Hz
Max SPL at 1mt (peak) 127 dBspl SPL max a 1m (picco) 127 dBspl
Total peak power 600 W Potenza massima di picco 600 W
HF Amplier Cont.Power 50 W Class AB Potenza Connua Amp. AF 50 W Classe AB
LF Amplier Cont. Power 250 W Class D Potenza Connua Amp. BF 250 W Classe D
Power Supply type SMPS Tipo alimentazione SMPS
Input Impedance 30 kohm balanced
15 kohm unbalanced
Impedenza ingresso 30 kohm bilanciato
15 kohm sbilanciato
Input Sensivity LINE: +4 dBu / MIC: +34 dBu Sensibilità ingresso LINE: +4 dBu / MIC: +34 dBu
Controls MIC GAIN, LINE LEVEL, LOW EQ, HIGH EQ, GND li Controlli MIC GAIN, LINE LEVEL, LOW EQ, HIGH EQ, GND lif
Connectors MIC: XLR-F, LINE: Combo XLR-F / JACK, LINK: XLR-M Conneori MIC: XLR-F, LINE: Combo XLR-F / JACK, LINK: XLR-M
Power Supply 230 V~ or 120 V~ - 50 / 60 Hz Tensione alim. di rete 230 V~ or 120 V~ - 50 / 60 Hz
Rated Consumpon 290 W Consumo nominale 290 W
Construcon Hi Density Polypropylene with Metal Grid Costruzione Polipropilene Alta Densità con Griglia in Metallo
Cabinet Colour Black Colore Nero
Flying System 4 x M10 Sistema di sospensione 4 x M10
Pole Adapter 1 x boom Flangia per suppor 1 x soo
Handles 2 x sides, 1 x top Maniglie 2 x ai la, 1 x sopra
Monitor taper 42° Inclinazione monitor 42°
Weight 23.5 Kg (51.8 lb) Peso 23.5 Kg
Dimensions (W x H x D) 470 x 730 x 400 mm Dimensioni (LxAxP) 470 x 730 x 400 mm
TECHNICAL SPECIFICATIONS
SPECIFICHE TECNICHE