User Manual
Table Of Contents
- INTRODUCTION
- DESCRIPTION
- MAIN PANEL OPERATIONS
- OPTIONAL ACCESSORIES
- INTRODUZIONE
- DESCRIZIONE
- FUNZIONI DEL PANNELLO PRINCIPALE
- ACCESSORI OPZIONALI
- TECHNICAL SPECIFICATIONS
- DIVA12A TECHNICAL DRAWING
- DIVA15A TECHNICAL DRAWING
- MULTIMEDIA / CONFERENCE CONFIGURATION EXAMPLE
- FOLKSINGER CONFIGURATION EXAMPLE
- STEREO STANDARD CONFIGURATION EXAMPLE
9
response curve.
NOTE: the figures above show the EQ curves at minimum and maximum of their ranges that is +/-12dB.
13. MASTER
This knob usually sets the master level of all signals sent to the internal amplifier. The range of the
attenuation starts from 0dB to -80dB (practically muted). When pressed, it allows to access the DSP
functions such as mode selection and system configuration. Press and dial to toggle between VOL /
MODE / CONFIG / INFO, then press again to access the available options.
14. LCD DISPLAY
The LCD DISPLAY allows to show and access all available options that can be selected using the MASTER
knob. When the device is switched on it shows the following:
When the VOL option is selected, just turn the MASTER VOLUME
knob to reduce the speaker level. The attenuation is shown in the
left bottom corner: 0dB is the maximum level and -80 dB is the
minimum level.