User Manual
Table Of Contents
- INTRODUCTION
- DESCRIPTION
- MAIN PANEL OPERATIONS
- OPTIONAL ACCESSORIES
- INTRODUZIONE
- DESCRIZIONE
- FUNZIONI DEL PANNELLO PRINCIPALE
- ACCESSORI OPZIONALI
- TECHNICAL SPECIFICATIONS
- DIVA12A TECHNICAL DRAWING
- DIVA15A TECHNICAL DRAWING
- MULTIMEDIA / CONFERENCE CONFIGURATION EXAMPLE
- FOLKSINGER CONFIGURATION EXAMPLE
- STEREO STANDARD CONFIGURATION EXAMPLE
7
1. CH1 / CH2 INPUT CONNECTOR
This is a COMBO connector that accepts an XLR plug or a JACK plug from any balanced or unbalanced
dynamic microphone or line level device or instrument.
The balanced XLR input is wired as follows:
Pin 1 = shield or ground
Pin 2 = + positive or "hot"
Pin 3 = - negative or "cold"
The balanced JACK input is wired as follows:
Tip = + positive or "hot"
Ring = - negative or "cold"
Sleeve = shield or ground
The unbalanced JACK input is wired as follows:
Tip = + positive or "hot"
Sleeve = shield or ground
2. CH1 / CH2 INPUT SELECTOR
This selector allows to choose the most appropriate input impedance and gain setting for the sound
source device connected at the input connector. Choose the proper setting among the following:
MIC Select this position if a dynamic microphone is connected.
GUITAR Select this position if an instrument with high impedance pick-up is connected,
typically electric guitars or electric bass instruments.
LINE Select this position if an instrument or another player or mixer with low impedance
line level output is connected.
3. CH1 / CH2 LEVEL
This potentiometer sets the level of CH1 / CH2 channels and of WIRELESS 1 / 2.
4. WIRELESS 1 / 2
These inputs are reserved for using PROEL U24H or U24B 2.4GHz USB Wireless Microphone.
NOTE: when using the wireless microphones, it is preferable to disconnect any MIC/GUITAR/LINE device
from the respective channel.
5. CH3 LINE IN (MINI JACK)
This is a MINI JACK (3.5mm) female connector that accepts a STEREO MINI JACK plug from Computer /
CD / DVD / MP3 players. The MINI JACK is wired as follows:
Tip = positive signal of left channel
Ring = positive signal of right channel
Sleeve = shield or ground
6. CH3 LEVEL
This potentiometer sets the level of the CH3 LINE IN input or the built-in BLUETOOTH Player.
NOTE: when using the BLUETOOTH, it is preferable to disconnect any device from the mini-jack input.
7. PAIR
Use this button to pair your Bluetooth player with the DIVA speaker.
• For the first time pairing press and hold this button until its LED is flashing. In your Bluetooth
player choose the DIVA12A/DIVA15A device: if the pairing is successful the LED lights steadily
and the DIVA12A/DIVA15A appears in the list of the paired device of your Bluetooth player. Now
you can play music using your favourite app and you can adjust the level using the CH3 level
potentiometer and the volume level in your Bluetooth player.