Specifications

ManualsBrandsProdipe ManualsComputer equipmentPro5V2

U S E R M A N U A L

S t u d i o M o n i t o r s

Pro8V2 – Pro5V2

Pro10SV2

Summary of content (12 pages)

PAGE 1
USER S t u d i o MANUAL M o n i t o r s Pro8V2 – Pro5V2 Pro10SV2
PAGE 2
Precaution Thank you for purchasing this digital appliance. To ensure perfect operation and security, please read the manual carefully and retain it for future reference. Safety Precautions The lightning flash with the arrowhead symbol in an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” inside the appliance that may be of sufficient magnitude to constitute a risk of electric shock.
PAGE 3
Contents 1 - Introduction.........................................................................................................................1 2 - Connections..........................................................................................................................2 3 - Settings ..................................................................................................................................3 4 - Audio Inputs/Outputs .......................................................
PAGE 4
1 – Introduction We would like to thank you for having chosen our PRODIPE products. Safety Precautions For your security and for the correct implementation of this product, please read the safety precautions on the inside cover page. Caution, if you want to reduce the risk of being electrocuted, do not remove the rear panel on this product. Please contact your retailer or a qualified technician for any maintenance that needs to be carried out.
PAGE 5
2 – Connections To ensure the proper implementation of your monitor system, please adhere to the following procedures at all times: 1. 2. 3. 4. Check your audio lead. Switch on the other equipment you intend to use (audio mixer, PC, audio source, etc.) Check your monitor settings and the settings of your audio sources (lowest volume). Check the voltage , switch on the Prodipe monitors by putting switch  in the ON position and the blue LED  will light up.
PAGE 6
3 - Settings There are different settings on the rear panels of your monitors: VOLUME You can adjust the gain setting at the back of the monitor using the changeover switch in Figure 3. It can be set from -30dB to +6dB. Figure 3 ADJUSTING THE HIGH FREQUENCIES (HF LEVEL) You can adjust the high frequencies at the back of the monitor (Figure 4). The possible values are +1dB, 0dB (flat), -1dB, or -2dB at around 2 kHz.
PAGE 7
PHASE - Pro10SV2 only The speakers have a backwards/forwards linear movement that creates a phenomenon known as compression - rarefaction. The low frequencies from the monitor system should reinforce the low frequencies from the subwoofer. The monitors should therefore follow the same movement and the Phase control lets you reverse this movement. Figure 6 4 – Audio Inputs/Outputs The XLR and TRS connectors are balanced whilst the RCA connectors are unbalanced.
PAGE 8
AUDIO SOURCE MONO Output TRS, XLR or RCA SOURCE AUDIO LEFT MONO Output TRS, XLR or RCA LEFT MONO Output TRS, XLR or RCA MONO Input TRS, XLR or RCA MONO Input TRS, XLR or RCA IN LEFT IN RIGHT OUT LEFT OUT RIGHT MONO Input TRS, XLR or RCA Figure 10 – Connections 5 – Monitor Layout The Prodipe studio monitors can be placed in a vertical or horizontal position.
PAGE 9
As shown in Figure 13, the position of a monitor in relation to an audio mixer can change the sound waves and hence distort how you perceive your sound production. Figure 13 Positioning for 5.1 Surround Pro 5/8 Pro 5/8 30° Pro10S 30° 110° 110° Listening Position Pro 5/8 Pro 5/8 Figure 14 We have provided the angles and the distance ratios for your information based on studies from sound engineers.
PAGE 10
6 - Specifications Pro5 V2 Pro8 V2 Pro10S V2 Frequency Response 45Hz -22kHz 45Hz -22kHz 30Hz -150Hz High Frequency Driver 1” (25 mm) Silk Dome 1” (25 mm) Silk Dome Low Frequency Driver 5” (150 mm) Alumium Cone Rubber surround 8” (220 mm) Alumium Cone Rubber surround 10" (273 mm) long excursion Alumium Cone Rubber surround 75 Watts 140 Watts 225 Watts 82dB / 90dB 0.05% / 0.02% 86dB / 97dB 0.09% / 0.01% 98 dB 0.