User manual

Pod3 Features

Front Panel Features

1. iPod Universal Dock Adapters: Plays & Charges for your iPod.

2. Tweeter: 1” Magnetically Shielded Natural Silk Dome.

3. LED: Which indicates whether the speakers (amplifier) power is on or off.

4. Infrared receiver: Receive the instruction from remote control.

5. Woofer: 3” Magnetically Shielded Paper Cone.

6. Enclosure: Like the other components, the Pod3’s enclosure has an important role in

shaping the overall sonic response. In order to provide more stable performance, the Pod3’s

enclosure employs a special high acoustic efficiency MDF and unique interior

reinforcement designed to absorb vibration and impact generated under extreme

conditions.

Rear Panel Features

7. USB: charging&syncing with your computer.

8. Vent Port: This port aids in reproduction of very low frequencies by discharging

frequencies below 70Hz.

9. Input Selector: iPod,RCA In,Aux In select button.

10. Volume Control: Use the volume control to set the output sound pressure from the Pod3

system to proper levels as required.

11. Aux In: For maximum flexibility, we have included a stereo “Aux in” input which

allows you to plug in a secondary audio source(such as your portable music player).

12. RCA In: Used to connect signals from unbalance, -10dBv devices. The white connector

is for the Left input and the red connector is for the Right input.

13. SUB Out : To connect the optional subwoofer,connect the SUB Out to the signal input

on your subwoofer using an RCA cable.

14. Speaker Out: Use 2 meter, speaker cable included in the Pod3 package to connect the

left and right speakers via the 1/8″ mini jacks on the back of each speaker.

15. Power Receptacle: Accepts a detachable 2-circuit line cord in order to power the device.

16. Power Switch: This switch turns the device on and off, The on position is indicated with

the marking″.″ (a white dot).

17. Fuse Holder: Holds the external main fuse.

18. Speaker In: Use 2 meter, speaker cable included in the Pod3 package to connect the left

and right speakers via the 1/8″ mini jacks on the back of each speaker.