USER MANUAL Pod3 Copyright © 2007 IPE Music
Precaution Thank you for purchasing this digital appliance. To ensure perfect operation and security, please read the manual carefully and retain it for future reference. Safety Precautions The lightning flash with the arrowhead symbol in an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” inside the appliance that may be of sufficient magnitude to constitute a risk of electric shock.
Contents Introduction.............................................4 What’s in the Box?..................................4 Pod3 Features ..........................................5 Installation ...............................................7 Specifications ...........................................
Introduction We would like to thank you for having chosen our Pod serial products. Safety Precautions For your security and for the correct implementation of this product, please read the safety precautions on the inside cover page. Caution, if you want to reduce the risk of being electrocuted, do not remove the rear panel on this product. Please contact your retailer or a qualified technician for any maintenance that needs to be carried out.
Pod3 Features Front Panel Features 1. 2. 3. 4. 5. 6. iPod Universal Dock Adapters: Plays & Charges for your iPod. Tweeter: 1” Magnetically Shielded Natural Silk Dome. LED: Which indicates whether the speakers (amplifier) power is on or off. Infrared receiver: Receive the instruction from remote control. Woofer: 3” Magnetically Shielded Paper Cone. Enclosure: Like the other components, the Pod3’s enclosure has an important role in shaping the overall sonic response.
Remote Control Features • • • • • • • • • • • • • • • • • • • • • BACKLIGHT: When press, ipod backlight for 30s MUTE: When press, change between mute and mute off. REPEAT: When press, change ipod repeat status. repeat off=>repeat one track==>repeat all tracks==>repeat off VOL UP : When press, volume up VOL DOWN: When press, volume down. SHUFFLE: When press, change ipod shuffle status. shuffle off==>shuffle tracks==>shuffle albums==>shuffle off REW/PREVIOUS: When press, play previous track.
Installation For optimal performance of the Pod3, please read the following directions carefully before installation. Precautions Connections: Connect the RCA outputs of your Pod3 to the corresponding computer sound card, portable music player, or other audio device. We recommend that you use the supplied cables (or cables of equal or higher quality) for all connections. Be sure that the Pod3 are powered off before making any connections.
Connecting to a Computer Sound Card or Other Audio Output Device Before connecting the Pod3 Powered Speaker System, make sure the power from the computer or other output device has been turned off and the Pod3 system is also turned off. Plug the RCA cable to the corresponding output connectors of a computer sound card, portable music player, etc. You can also use the 1/8″ stereo mini cable to connect a secondary audio device to the ″Aux″ input.
Specifications Type: 2.0 Powered Speaker System LF Driver: Woofer: 3" Magnetically Shielded Paper Cone HF Driver: Tweeter: 1" Magnetically Shielded Natural Silk Dome Frequency Response: 70Hz-20KHz Crossover Frequency: 3.3KHz S/N Ratio: >90dB (typical, A-weighted) Dynamic Power: 10 watts RMS 4 Ω per channel @0.
