Operation Manual

© proDAD GmbH
8
Two options are now available to perform speed settings in ReSpeedr.
1. by selecting a default setting (from 1% to 500%) in the speed menu for slow motion or time
lapse.
2. by defining a new target runtime in the Duration menu.
3. or by selecting a speed change directly in the displayed progress bar under the timeline, which
is now used for clarification.
The gray 1 represents the original speed of the imported video.
a. Now select a value on the left of the 1, then a Slow Motion is set at the respectively set
value (i.e. -2 means 2 times slower or -16 = 16 times slower).
b. Now select a value on the right of the 1, a Time Lapse with the respective selected value (i.e.
+3 means 3 times faster or +29 = 29 times faster) is set.