Operation Manual

© proDAD GmbH
51
13.3. Notes in the video
See 11. Overlay notes
13.4. GPU not available
Make sure that the graphic card driver or the Windows/MAC-OSX are not outdated.
14. Important information
14.1. CMOS Fixr in latency mode
For technical reasons, the CMOS Fixr runs with a time delay in EDIUS, the latency.
Here, the CMOS Fixr causes a 1-2 frame shift to the sound. Furthermore, the correction only works
on consecutive frames in the forward direction.
For the random scrolling of the timeline, the correction does not work and the unchanged video loops
through. Only once the cursor is moved forward by 3 to 4 frames, will there be a correction function.
With an open dialog window, the CMOS Fixr will show a warning until the correction function is able
to work again.
14.2. Combination of CMOS Fixr + Stabilizr
The CMOS Fixr and the Stabilizr can be used simultaneously for the best possible stabilization. Here,
the video is CMOS corrected and stabilized without another intermediate step. This yields the best
results.
The order is important!
The CMOS Fixr must be run before the Stabilizr.
The rolling shutter compensation must be turned off in the Stabilizr!