Operation Manual

© proDAD GmbH
50
11.2.5. Stereoscopic Videos are not supported
12. FAQ
12.1. Logo cannot be switched off
The product logo cannot be switched off until the product has been released. See 4.
12.2. Hardware acceleration can be selected
The hardware selection is only available (selectable) if the first graphic card in the system meets the
requirements. See 2.1.
12.3. How can difficult videos be stabilized?
In this case, use the stand-alone version Mercalli V4 SAL.
13. Errors
13.1. Product cannot be activated
The activation key may not have been entered correctly.
Characters such as "1" and "I", "8" and "B" or "O" and "0" should be rechecked.
13.2. Connection to www.prodad.com cannot be
established
If the connection to www.prodad.com should fail, check your Internet connection, network settings
or security settings in the system.