Operation Manual

7.6. View Mode

The menu View Mode contains different options to display the video preview.

1. View Result (shows the stabilized video as a preview)

2. Horizontal Compare (Comparison of original/stabilized in a horizontal split screen)

3. Vertical Compare (Comparison of original/stabilized in a vertical split screen)

4. View Source (shows the original video as a preview)

There is also the option to display a Logo in the video; this is especially suitable for video

comparisons before/after.

7.7. Remap Mode

Under Remap Mode the type of pixel calculation is defined:

 Cubic: Allows more quality along borders and corners. Compared to linear, the image will keep

its sharpness. This mode requires a higher calculation effort.

 Linear: Is the normal way and a good compromise between quality and calculation effort.

 Nearest: Is the quickest way, but does not consider sub-pixels.

7.8. Sensor speed

A CMOS sensor reads the image data with reference to the model and location of use at different

speeds. The correction of the CMOS distortion enabled by proDAD only works optimally if this speed

is known. The Estimate button determines a probable speed value.

If incorrect speed values are used, this could cause an over or under correction.

7.9. Overlay notes

Continue reading here