Operation Manual

© proDAD GmbH
40
from your video. This is the best basis for better stabilization results. The subsequent stabilization of
undesired camera movements is much more optimized on the basis of images that are free of
vibrations and wobbling!
The CMOS Fixr offers extensive adaptation possibilities for this, however, the use of the program is
very simple, as the stabilization as well as the CMOS correction take place fully automatically. Of
course, there is additional fine adjustment - therefore, you will always have the opportunity to
intervene.
If you wish to start the fully automatic CMOS correction in the video, first select one of the templates,
Precise or Super fast from the menu until you have achieved the best possible optimization.
The Precise option automatically defines the method Wobble/Vibrations (Precise/GPU). There
are videos that require the use of a more intense correction (GPU is utilized); this correction uses
more computer power and therefore requires more time.
The Super fast option uses the method Wobble/Vibrations (Fast/GPU). Here, the GPU is used
as well. In addition, the option Faster (higher latency) is activated, which speeds up the
correction.
7.4. Method
Furthermore, the CMOS Fixr offers different CMOS correction methods to select from, which can be
included in the video, such as Wobble/Vibrations (Fast/GPU), Wobble/Vibrations
(Precise/GPU) and Quickrepair, which can be used to counteract the vibrations and waves. If you
wish to further optimize the fully automatic CMOS correction in the video, select one of the available
CMOS distortion methods from the menu until you have reached the best possible optimization.
7.5. Avoid Border
The required correction might lead to image borders. The following methods to Avoid Border
are available:
 Inpaint: Copy missing image portions from adjacent pictures. This is the best method, but
requires a higher calculation effort compared to the other possibilities.
 Reflect: Repeat the mirrored border area.
 Replicate: Fill the borders with border color.
 Off: Show borders as black areas.