Operation Manual

Depending on the position of the slider Dynamic Scale the zoom requirement will also vary by

time position. The maximum value is always constant, the minimum value can sink with a higher

dynamic (but does not have to).

Also see: 15.1.12.

6.13.3. Perspective

6.13.3.1. X/Y Axis - Compensate

The slider X-Axis - Balance effects a correction of the video regarding the movements (rotation)

around the Y-Axis (tilting movement of the camera in the direction Y). Displayed in the X/Y Axis

diagram by the cyan-colored curve. Move the slider X-Axis - Balance to change the correction

respective to the rotation around the X-Axis. In the diagram, this change will be displayed in the

cyan-colored curve.

The slider Y-Axis - Balance effects a correction of the video regarding the movements (rotation)

around the Y-Axis (tilting movement of the camera in the direction Y). Displayed in the X/Y Axis

diagram by the magenta-colored curve. Move the slider Y-Axis - Balance to change the correction

respective to the rotation around the Y-Axis. In the diagram, this change will be displayed in the

magenta-colored curve.

Also see: 15.1.17.

6.13.3.2. Zoom - Compensate

With the slider Zoom - Compensate, you can smooth the Zoom Movement in the video.

Move the slider further to the right, this will effect a stronger smoothing of zoom changes. Existing

blurring in the zoom is thus balanced. Changes in the Zoom correction curve are also visible in the