Operation Manual

6.13.1.1. Pan Shot Smoothing

With the slider Pan Shot Smoothing you balance the total movements in the video. If you move the

slider further to the right, Mercalli increases the stabilization, the video appears quieter.

The slider Pan Shot Smoothing causes the greatest visual change (smoothing of the movement in

the video).

Also, in the Pan diagram, you will see changes in the correction curve.

6.13.1.2. Roll - Compensate

The slider Roll - Compensate effects a correction of the video regarding the movements (rotation)

around the Z-Axis. Changes in the correction curve are also visible in the Roll diagram.

The slider Roll - Compensate can also be deactivated, but only if the slider Zoom - Balance has

already been deactivated. Then, there will be no correction of the Roll movement (Z-Axis) in the

video.

The slider Roll - Compensate will be deactivated if rolling movements cannot be evaluated by

Mercalli, or if only pans are to be stabilized.

6.13.2. Border

6.13.2.1. Border

The Balancing of Movements creates calculation-related borders.

So, if you move the image 10 pixels to the left to compensate or balance an originally caused blur to

the right, a border, or rather an information gap is created on the right side of the image. This can

usually be seen as empty content or black image areas. At this point, the user can decide how to

perform the border calculation.