Operation Manual

Depending on the position of the slider Dynamic Scaling, the zoom requirement will also vary

by time position. The maximum value is always constant, the minimum value can sink with a higher

dynamic (but does not have to).

6.10. Remap Mode

Under Remap mode the type of pixel calculation is defined:

 Cubic: Allows more quality along borders and corners. Compared to linear, the image will keep

its sharpness. This mode requires a higher calculation effort.

 Linear: Is the normal way and a good compromise between quality and calculation effort.

 Nearest: Is the quickest way, but does not consider sub-pixels.

6.11. Info text

Here, the current status is displayed.

6.12. Avoid Border

The use of the slider in the field Avoid Border depends on the type of blur in the video.

Generally, the Stabilizr proceeds following certain automatic schemes.

If you remove nearly all undesired movements that are signaled by a Pan diagram, move the slider

only as far as you need to go in the field Avoid Border in order to maintain the original resolution in

the stabilized result as much as possible.

Deactivate Avoid Border; the setting will then change to Best Stabilization; this may cause a

minimal border in the video. The display Cam Limiter (to the right of the preview) is turned off.

Also see: 15.1.2.