Operation Manual

Roll-Compensation (with On/Off)

The Roll-Compensation graph shows movement in the video due to rotation about the Z-axis.

Moving the mouse over the graph displays the instantaneous values.

You can also deactivate the Roll-Compensation graph (immediately to the right of the graph).

Doing so disables correction and display of stabilization about the Z-axis.

The crosshatched bands at the top and bottom of the graph indicate the limit of the maximum

rotation movements in the video. Moving the Avoid Border slider thus adjusts the height of these

bands. Doing so enables you to eliminate the unwanted movements indicated by a

in the

graph.

CMOS-Sensor-Rolling-Shutter-Compensation (with

On/Off)

The fully automatic Rolling-Shutter-Compensation allows post-production correction of the

weaknesses inherent in CMOS sensors. The green curve indicates the correction (countering of the

effect) by Mercalli and the orange curve shows the residual error (not correctable). Moving the

mouse over the graph displays the instantaneous values.

You can also deactivate the CMOS Sensor Rolling-Shutter Compensation graph (immediately

to the right of the graph). As you'd expect, the orange curve indicating the residual error is still

shown. The green curve for the correction no longer appears and no correction is executed.