Product manual

append -- Add the key(s) for access. (p. 94)■
■ command-file -- Copy command script to switch and execute. (p. 100)
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 103)
■ pc -- Change CR/LF to PC style. (p. 119)
■ unix -- Change CR/LF to unix style. (p. 130)
■ flash -- Copy data to the switch system image file. (p. 111)
■ image-name -- Specify filename for the USB transfer. (ASCII-STR) (p. 112)
■ cv_flash < primary | secondary > -- Copy to primary/secondary flash. (p. 102)
■ pub-key-file -- Copy the public keys to the switch. (p. 121)
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 103)
■ append -- Add the key(s) for operator access. (p. 94)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option to
add the key(s). (p. 112)
■ append -- Add the key(s) for access. (p. 94)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s). (p. 116)
■ append -- Add the key(s) for access. (p. 94)
■ startup-config -- Copy data to the switch configuration file. (p. 121)
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 103)
■ append -- Add the key(s) for operator access. (p. 94)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option to
add the key(s). (p. 112)
■ append -- Add the key(s) for access. (p. 94)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s). (p. 116)
■ append -- Add the key(s) for access. (p. 94)
■ copy xmodem -- Use xmodem on the terminal as the data source. (p. 133)
■ command-file -- Copy command script to switch and execute. (p. 100)
■ pc -- Change CR/LF to PC style. (p. 119)
■ unix -- Change CR/LF to unix style. (p. 130)
■ config -- Copy data to specified configuration file. (ASCII-STR) (p. 101)
■ pc -- Change CR/LF to PC style. (p. 119)
■ unix -- Change CR/LF to unix style. (p. 130)
■ flash -- Copy to primary/secondary flash. (p. 111)
■ cv_flash < primary | secondary > -- Copy to primary/secondary flash. (p. 102)
■ startup-config -- Copy data to the switch configuration file. (p. 121)
■ pc -- Change CR/LF to PC style. (p. 119)
■ unix -- Change CR/LF to unix style. (p. 130)
EXAMPLES
Example: copy config tftp
Copy a startup-config file named test-01 from the switch to a UNIX TFTP server at IP address
10.10.28.14:
ProCurve(cong)# copy cong test-01 tftp 10.10.28.14 test-01.txt unix
Example: copy flash flash primary
Copy the image in secondary flash to primary flash:
ProCurve(cong)# copy ash ash primary
93© 2008 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide