Product manual

■ flash -- Copy data to the switch system image file. (p. 111)
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 124)
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 103)
■ cv_flash < primary | secondary > -- Copy to primary/secondary flash. (p. 102)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 127)
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 103)
■ cv_flash < primary | secondary > -- Copy to primary/secondary flash. (p. 102)
■ pub-key-file -- Copy the public keys to the switch. (p. 121)
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 124)
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 103)
■ append -- Add the key(s) for operator access. (p. 94)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option
to add the key(s). (p. 112)
■ append -- Add the key(s) for access. (p. 94)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s). (p. 116)
■ append -- Add the key(s) for access. (p. 94)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 127)
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 103)
■ append -- Add the key(s) for operator access. (p. 94)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option
to add the key(s). (p. 112)
■ append -- Add the key(s) for access. (p. 94)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s). (p. 116)
■ append -- Add the key(s) for access. (p. 94)
■ startup-config -- Copy data to the switch configuration file. (p. 121)
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 124)
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 103)
■ pc -- Change CR/LF to PC style. (p. 119)
■ unix -- Change CR/LF to unix style. (p. 130)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 127)
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 103)
■ pc -- Change CR/LF to PC style. (p. 119)
■ unix -- Change CR/LF to unix style. (p. 130)
■ copy usb -- Copy data from a USB flash drive. (p. 131)
■ autorun-cert-file -- Copy autorun trusted certificate to the switch. (p. 99)
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 103)
■ append -- Add the key(s) for operator access. (p. 94)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option to
add the key(s). (p. 112)
■ append -- Add the key(s) for access. (p. 94)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s). (p. 116)
■ append -- Add the key(s) for access. (p. 94)
■ autorun-key-file -- Copy autorun key file to the switch. (p. 99)
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 103)
■ append -- Add the key(s) for operator access. (p. 94)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option to
add the key(s). (p. 112)
■ append -- Add the key(s) for access. (p. 94)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s). (p. 116)
92© 2008 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide