Product manual

connection-rate-filter

OVERVIEW

TroubleshootingCategory:

configPrimary context:

filter (page 172)Related Commands

ip (page 269)

vlan (page 611)

show connection-rate-filter (page 465)

Usage: connection-rate-lter unblock < host SRC-IP-ADDR | SRC-IP-ADDRESS/MASK >

[no] connection-rate-lter sensitivity <low|medium|high|aggressive>

Description: Re-enables access to a host or set of hosts that has been previously

blocked by the connection rate lter. Disabling or setting sensitivity

may have improved performance after rebooting the switch

COMMAND STRUCTURE

■ connection-rate-filter sensitivity -- Sets the level of filtering required (p. 81)

■ sensitive < low | medium | high | ... > -- (p. 80)

■ connection-rate-filter unblock -- Resets a host previously blocked by the connection rate filter (p.

81)

■ all -- Resets all previously blocked by the connection rate filter (p. 80)

■ host -- Match packets from the specified IP address. (IP-ADDR) (p. 80)

■ src-ip -- Match packets from the specified subnet. (IP-ADDR/MASK-LENGTH) (p. 81)

COMMAND DETAILS

src-ip (p. 81)sensitive (p. 80)all (p. 80)

unblock (p. 81)sensitivity (p. 81)host (p. 80)

all

■ connection-rate-filter unblock all

Resets all previously blocked by the connection rate lter

host

■ connection-rate-filter unblock host IP-ADDR

Match packets from the specied IP address.

sensitive

■ connection-rate-filter sensitivity < low | medium | high | ... >

Supported Values:

■ low -- Sets the level of connection rate filtering to low (most permissive)

■ medium -- Sets the level of connection rate filtering to medium (permissive)

■ high -- Sets the level of connection rate filtering to high (restrictive)

■ aggressive -- Sets the level of connection rate filtering to aggressive (most restrictive)