Product manual

Next Available Option:
■ flash < primary | secondary > -- Specify the default flash boot image.(p. 68)
standby
■ boot standby
Reboot the standby management module. The switch does not switchover.
If the standby module is not present, this message displays: “The other
management module is not present.”
system
■ boot system
Allows user to specify boot image to use after reboot.
Next Available Option:
■ flash < primary | secondary > -- Specify boot image to use after reboot.(p. 68)
69© 2008 Hewlett-Packard Development Company, L.P.
bootCommand Line Interface Reference Guide