Product manual

to determine this). Each subnet must have at least one IGMP
Querier-capable device in order for IGMP to function
properly. The querier interval setting modies the time (in
seconds) between IGMP queries.
Next Available Option:
■ interval < 5 to 300 > -- Sets the interval in seconds between IGMP queries (default: 125) (p. 632)
■ [no] vlan VLAN-ID ipv6 mld querier
Usage: [no] vlan < vid > ipv6 mld querier
Description: This command disables or re-enables the ability for the switch
to become querier if necessary. The no version of the command
disables the querier function on the switch.
The show ipv6 mld cong command displays the current querier
command. (Default Querier Capability: Enabled.)
rapid-commit
■ [no] vlan VLAN-ID ipv6 address dhcp full rapid-commit
Obtain IPv6 address quickly from DHCPv6 server.
receive
■ vlan VLAN-ID ip rip receive < V1-only | V2-only | V1-or-V2 | ... >
Dene RIP version for incoming packets.
Supported Values:
■ V1-only -- Accept RIP version 1 updates only.
■ V2-only -- Accept RIP version 2 updates only.
■ V1-or-V2 -- Accept both RIP 1 and RIP 2 updates.
■ disabled -- Do not accept RIP updates.
■ vlan VLAN-ID ip rip IP-ADDR receive < V1-only | V2-only | V1-or-V2 | ... >
Dene RIP version for incoming packets.
Supported Values:
■ V1-only -- Accept RIP version 1 updates only.
■ V2-only -- Accept RIP version 2 updates only.
■ V1-or-V2 -- Accept both RIP 1 and RIP 2 updates.
■ disabled -- Do not accept RIP updates.
■ vlan VLAN-ID ip rip all receive < V1-only | V2-only | V1-or-V2 | ... >
Dene RIP version for incoming packets.
Supported Values:
■ V1-only -- Accept RIP version 1 updates only.
■ V2-only -- Accept RIP version 2 updates only.
■ V1-or-V2 -- Accept both RIP 1 and RIP 2 updates.
■ disabled -- Do not accept RIP updates.
retransmit-interval
■ vlan VLAN-ID ip ospf retransmit-interval < 1 to 3600 >
649© 2008 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide