Product manual

Next Available Option:
■ ttl-threshold < 0 to 255 > -- Set the multicast datagram TTL threshold for the interface(p. 652)
name
■ vlan VLAN-ID name NAME
Usage: name ASCII-STR
Description: Set the VLAN's name.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
nbr-timeout
■ vlan VLAN-ID ip pim-sparse nbr-timeout < 60 to 8000 >
Usage: ip pim-sparse nbr-timeout <60-8000>
Description: Set the neighbour loss time interval for this interface.
Default is 180 seconds.
Range: < 60 to 8000 >
no-default
■ vlan VLAN-ID ip irdp preference no-default
Indicates that the router should never be used as a default by its neighbors.
number
■ vlan VLAN-ID ip irdp preference < -2147483647 to 2147483647 >
The router preferability number. Higher values are more preferable.
Range: < -2147483647 to 2147483647 >
ospf
■ [no] vlan VLAN-ID ip ospf
Usage: [no] ip ospf [...]
Description: Enable/disable/congure Open Shortest Path First (OSPF)
protocol on the VLAN interface.
Called without 'no', the command enables OSPF on the interface.
Otherwise ('no' is specied), the command disables OSPF on the
interface. The command can be followed by an OSPF conguration
command. Use 'ip ospf ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Options:
■ passive -- Configures an ospf interface as passive. (p. 643)
■ area -- Specify an OSPF area.(p. 622)
■ authentication-key -- Set simple authentication method and key.(p. 623)
■ authentication -- Disable authentication.(p. 623)
642© 2008 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide