Product manual

Usage: [no] ipv6 mld [...]
Description: Enable/disable/congure IPv6 Multicast Listener Discovery (MLD)
feature on a VLAN. This command enables, disables or
congures the MLD feature for MLD communication between
Multicast Routers, Multicast Servers, and Multicast Clients
connected to the device. This is a VLAN context command.
If not preceded by 'no',
the command accepts a variety of conguration parameters. To
get a list of all available parameters use 'ipv6 mld ?'. To
get detailed help for a parameter follow it with 'help'
keyword.
Example Commands:
ProCurve(vlan-8)# ipv6 mld forward a16-a18
ProCurve(vlan-8)# ipv6 mld blocked a19-a21
ProCurve(vlan-8)# show ipv6 mld vlan 8 cong
Next Available Options:
■ querier -- This command disables or re-enables the ability for the switch to become querier if
necessary(p. 648)
■ auto -- Instruct the device to monitor incoming multicast traffic on the specified ports (this is
the default behavior) ([ethernet] PORT-LIST) (p. 625)
■ blocked -- Instruct the device to drop incoming multicast packets received on the specified
ports ([ethernet] PORT-LIST) (p. 625)
■ forward -- Instruct the device to forward incoming multicast packets received on the specified
ports ([ethernet] PORT-LIST) (p. 629)
■ fastleave -- Enables MLD fast-leaves on the specified ports in the selected VLAN ([ethernet]
PORT-LIST) (p. 628)
■ forcedfastleave -- Enables MLD Forced Fast-Leave on the specified ports in the selected VLAN,
even if they are cascaded ([ethernet] PORT-LIST) (p. 629)
monitor
■ [no] vlan VLAN-ID monitor
Usage: 1) [no] monitor all <in|out|both> mirror <1-4 | NAME-STR>
[1-4 | NAME-STR]...
2) [no] monitor ip access-group <ACL-NAME> <in> mirror
<1-4 | NAME-STR> [1-4 | NAME-STR]...
Description: Dene either the VLAN is to be monitored or not.
The network trafc seen by the monitored VLAN is copied to
the Mirroring Destination to which a network analyzer can be
attached.
Note: When mirroring a VLAN in a busy network,
some frames may not be copied to the mirroring port.
This is an VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID command.
Parameters: o 1-4 - Mirror destination number
o NAME-STR - Friendly name associated with the mirror
destination number.
o ACL-NAME - Standard or Extended Access Control List number.
o <in|out|both> direction of the trafc to be monitored.
640© 2008 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide