Product manual

■ maxadvertinterval < 4 to 1800 > -- Set the maximum time (in seconds) allowed between sending
unsolicited router advertisements(p. 638)
■ minadvertinterval < 3 to 1800 > -- Set the minimum time (in seconds) allowed between sending
unsolicited router advertisements(p. 639)
■ preference -- The preferability of the router as a default router, relative to the other routers on
the same subnet(p. 646)
jumbo
■ [no] vlan VLAN-ID jumbo
Usage: [no] jumbo
Description: Labels this VLAN as a Jumbo VLAN, allowing you to pass
packets up to 9220 bytes in size.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
lan-prune-delay
■ [no] vlan VLAN-ID ip pim-dense lan-prune-delay
Usage: [no] ip pim-dense lan-prune-delay
Description: Turn on/off the LAN Prune Delay Option on this interface.
Default is 'on'.
■ [no] vlan VLAN-ID ip pim-sparse lan-prune-delay
Usage: [no] ip pim-sparse lan-prune-delay
Description: Turn on/off the LAN Prune Delay Option on this interface.
Default is 'on'.
link-local
■ [no] vlan VLAN-ID ipv6 address IPV6-ADDR link-local
Congure a link-local IPv6 address.
local-proxy-arp
■ [no] vlan VLAN-ID ip local-proxy-arp
Usage: [no] ip local-proxy-arp
Description: Enable/disable local proxy ARP. This is a VLAN context command.
It can be called directly from the VLAN context or may follow
the 'vlan VLAN-ID' command prex. When local proxy ARP is
enabled on a VLAN, the device responds to all ARP requests
received on the VLAN ports with it's own hardware address.
lowest
■ vlan VLAN-ID vrrp vrid < 1 to 255 > primary-ip-address lowest
Dynamically determine lowest IP address.
637© 2008 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide