Product manual

Usage: [no] ipv6 ...
Description: Congure various IP parameters for the VLAN. The 'ipv6'
command must be followed by a feature-specic keyword.
Use 'ipv6 ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Options:
■ enable -- Enable IPv6 on an interface and configures an automatically generated link-local
addr.(p. 628)
■ address -- Set IPv6 parameters for communication within an IP network(p. 619)
■ mld -- Enable/disable/configure IPv6 Multicast Listener Discovery (MLD) feature on a VLAN(p.
639)
ipv6-addr
■ [no] vlan VLAN-ID ipv6 address IPV6-ADDR
Congure a link-local IPv6 address.
Next Available Option:
■ link-local -- Configure a link-local IPv6 address.(p. 637)
ipv6-addr/mask
■ [no] vlan VLAN-ID ipv6 address IPV6-ADDR/PREFIX-LEN
Congure IPv6 address represented in CIDR notation.
Next Available Options:
■ anycast -- Address that is assigned to a set of interfaces that typically belong to different
nodes(p. 622)
■ eui-64 -- An IPv6 EUI-64 address that can be automatically configured on any interface(p. 628)
irdp
■ [no] vlan VLAN-ID ip irdp
Usage: [no] ip irdp [...]
Description: Congure ICMP Router Discovery Protocol (IRDP). This is
a VLAN context command. It can be called directly from the VLAN
context or may follow the 'vlan VLAN-ID' command prex.
Called without parameters the command enables or disables (if
preceded by 'no') the protocol on the VLAN specied, or
identied by the current VLAN context. Use 'ip irdp ?' to get
a list of all possible congurable parameters.
Next Available Options:
■ advert-address < multicast | broadcast > -- Specify the destination address to be used for router
advertisements(p. 620)
■ holdtime < 4 to 9000 > -- Set the lifetime (in seconds) of the router advertisements sent on this
interface(p. 631)
636© 2008 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide