Product manual

■ vlan VLAN-ID ip pim-dense ip-addr IP-ADDR
Specify IP address.
■ vlan VLAN-ID ip pim-sparse ip-addr
Usage: ip pim-sparse [ip-addr IP-ADDR|any]
Description: Set the source IP address for the PIM-SM packets sent out on this
interface. You can either explicitly specify one of the existing
VLAN's IP addresses or use 'any' option to dynamically determine
it from the VLAN's current IP conguration. The default is 'any'.
This command also enable the PIM-SM protocol on the VLAN interface.
Next Available Options:
■ ip-addr -- Specify IP address. (IP-ADDR) (p. 633)
■ any -- Dynamically determine IP address.(p. 622)
■ vlan VLAN-ID ip pim-sparse ip-addr IP-ADDR
Specify IP address.
■ [no] vlan VLAN-ID vrrp vrid < 1 to 255 > virtual-ip-address IP-ADDR/MASK-LENGTH
Specify IP address/mask.
■ vlan VLAN-ID vrrp vrid < 1 to 255 > primary-ip-address IP-ADDR
Specify IP address.
ip-recv-mac-address
■ [no] vlan VLAN-ID ip-recv-mac-address
Usage: [no] ip-recv-mac-address <macaddress> interval <1-255>
Description: Associates a L3-mac-address with a VLAN.
To associate L3-Mac-Address for a VLAN.
ip-recv-mac-address <mac-address> interval <1-255>
To associate L3-Mac-Address with a VLAN with default
timeout interval of 60s.
ip-recv-mac-address <mac-address>
To disassociate L3-Mac_address with a VLAN.
no ip-recv-mac-address
Parameters:
<mac-address> - The L3-mac-address to be associated with a VLAN.
interval - Specify L3-Mac-Address timeout interval.
<1-255> - Timeout interval in seconds <1-255>.
Next Available Option:
■ mac-address -- The L3-mac-address to be associated with a VLAN. (MAC-ADDR) (p. 638)
ipv6
■ vlan VLAN-ID ipv6
635© 2008 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide