Product manual

Sets the interval in seconds between IGMP queries
(default: 125)
Range: < 5 to 300 >
vlan VLAN-ID ip-recv-mac-address MAC-ADDR interval
Specify the L3-Mac-Address timeout interval.
Next Available Option:
timer-interval < 1 to 255 > -- Timeout interval in seconds <1-255>. (p. 652)
ip
vlan VLAN-ID ip
Usage: [no] ip ...
Description: Congure various IP parameters for the VLAN. The 'ip'
command must be followed by a feature-specic keyword.
Use 'ip ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Options:
access-group -- Apply the specified access control list on this VLAN interface (ASCII-STR) (p.
618)
address -- Set IP parameters for communication within an IP network(p. 619)
proxy-arp -- Enable/disable proxy ARP(p. 648)
local-proxy-arp -- Enable/disable local proxy ARP(p. 637)
helper-address -- Add or remove a DHCP server IP address for the VLAN (IP-ADDR) (p. 631)
forward-protocol -- Add or remove a UDP server address for the VLAN(p. 629)
igmp -- Enable/disable/configure IP Multicast Group Protocol (IGMP) feature on a VLAN(p. 632)
irdp -- Configure ICMP Router Discovery Protocol (IRDP)(p. 636)
ospf -- Enable/disable/configure Open Shortest Path First (OSPF) protocol on the VLAN
interface(p. 642)
rip -- Enable/disable/configure Routing Internet Protocol (RIP) on the VLAN interface(p. 650)
pim-dense -- Enable/disable/configure PIM-DM protocol on the VLAN interface(p. 643)
pim-sparse -- Enable/disable/configure PIM-SM protocol on the VLAN interface(p. 644)
mroute -- Configure IP Multicast Routing parameters on the VLAN interface(p. 641)
[no] vlan VLAN-ID monitor ip
Apply an IPv4 access list.
Next Available Option:
access-group -- Define the mirror port for diagnostic purposes (ASCII-STR) (p. 618)
ip-addr
[no] vlan VLAN-ID ip address IP-ADDR/MASK-LENGTH
Interface IP address/mask.
633© 2008 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide