Product manual
Range: < 1 to 65535 >
dead-interval
■ vlan VLAN-ID ip ospf dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
■ vlan VLAN-ID ip ospf IP-ADDR dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
■ vlan VLAN-ID ip ospf all dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
dhcp
■ [no] vlan VLAN-ID ipv6 address dhcp
Congure a DHCPv6 client.
Next Available Option:
■ full -- Obtain IPv6 address & Configuration information from DHCPv6 server.(p. 630)
dhcp-bootp
■ vlan VLAN-ID ip address dhcp-bootp
Congure the interface to use DHCP/Bootp server to acquire parameters.
dhcp-snooping
■ [no] vlan VLAN-ID dhcp-snooping
direction
■ [no] vlan VLAN-ID ip access-group ACCESS-GROUP < in | out | connection-rate-filter | ... >
Supported Values:
■ in -- Match inbound packets
■ out -- Match outbound packets
■ connection-rate-filter -- Manage packet rates
■ vlan -- VLAN acl
domain-name
■ [no] vlan VLAN-ID igmp-proxy < END OF PRINTABLE >
Specify the domain name to associate/disassociate with the VLAN.
Supported Values:
■ END OF PRINTABLE
dr-priority
■ vlan VLAN-ID ip pim-sparse dr-priority INTEGER
627© 2008 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide