Product manual

Usage: ip igmp blocked [ethernet] PORT-LIST

Description: Instruct the device to drop incoming multicast packets

received on the specied ports. This feature is

congured on a per-VLAN basis.

■ vlan VLAN-ID ipv6 mld blocked [ETHERNET] PORT-LIST

Usage: vlan < vid > ipv6 mld blocked < port-list >

Description: Instruct the device to drop incoming multicast packets

received on the specied ports. This feature is

congured on a per-VLAN basis.

chain-name

■ vlan VLAN-ID ip ospf md5-auth-key-chain CHAIN-NAME

Specify key chain to use for MD5 authentication.

■ vlan VLAN-ID ip ospf IP-ADDR md5-auth-key-chain CHAIN-NAME

Specify key chain to use for MD5 authentication.

■ vlan VLAN-ID ip ospf all md5-auth-key-chain CHAIN-NAME

Specify key chain to use for MD5 authentication.

connection-rate-filter

■ vlan VLAN-ID connection-rate-filter

Usage: connection-rate-lter unblock < host SRC-IP-ADDR | SRC-IP-ADDRESS/MASK

[no] connection-rate-lter sensitivity <low|medium|high|aggressive>

Description: Re-enables access to a host or set of hosts that has been previously

blocked by the connection rate lter. Disabling or setting sensitivity

may have improved performance after rebooting the switch

Next Available Option:

■ unblock -- Resets a host previously blocked by the connection rate filter (p. 653)

cost

■ vlan VLAN-ID ip ospf cost < 1 to 65535 >

Set metric of this interface.

Range: < 1 to 65535 >

■ vlan VLAN-ID ip ospf IP-ADDR cost < 1 to 65535 >

Set metric of this interface.

Range: < 1 to 65535 >

■ vlan VLAN-ID ip ospf all cost < 1 to 65535 >

Set metric of this interface.

vlanCommand Line Interface Reference Guide