Product manual

auto

■ vlan VLAN-ID auto [ETHERNET] PORT-LIST

Usage: [no] auto [ethernet] PORT-LIST

Description: Cause each port identied in the port list to learn its

VLAN membership using the GARP VLAN Registration Protocol

(GVRP). This command is only valid when GVRP is enabled.

This is a VLAN context command. It can be called directly

from the VLAN context or follow the 'vlan VLAN-ID'

command.

■ vlan VLAN-ID ip igmp auto [ETHERNET] PORT-LIST

Usage: ip igmp auto [ethernet] PORT-LIST

Description: Instruct the device to monitor incoming multicast trafc

on the specied ports (this is the default behavior). This

feature is congured on a per-VLAN basis.

■ vlan VLAN-ID ipv6 mld auto [ETHERNET] PORT-LIST

Usage: vlan < vid > ipv6 mld auto < port-list >

Description: Instruct the device to monitor incoming multicast trafc

on the specied ports (this is the default behavior). This

feature is congured on a per-VLAN basis.

autoconfig

■ [no] vlan VLAN-ID ipv6 address autoconfig

Automatic address conguration.

backbone

■ vlan VLAN-ID ip ospf area backbone

The backbone area (the same as 0.0.0.0).

■ vlan VLAN-ID ip ospf IP-ADDR area backbone

The backbone area (the same as 0.0.0.0).

■ vlan VLAN-ID ip ospf all area backbone

The backbone area (the same as 0.0.0.0).

backup

■ vlan VLAN-ID vrrp vrid < 1 to 255 > backup

Usage: vrrp vrid <VRID> backup

Description: Designate the virtual router instance as a Backup.

There is no default value.

blocked

■ vlan VLAN-ID ip igmp blocked [ETHERNET] PORT-LIST

vlanCommand Line Interface Reference Guide