Product manual

Example: vlan ip address

Configure IP addressing on the default VLAN with the subnet mask specified in mask bits:

ProCurve(cong)# vlan 1 ip address 10.28.227.103 255.255.255.0

Example: vlan ip address

Configure the same IP addressing as the preceding example, but specify the subnet mask by mask

length:

ProCurve(cong)# vlan 1 ip address 10.28.227.103/24

Example: vlan ip address

Delete an IP address configured in VLAN 1:

ProCurve(cong) no vlan 1 ip address 10.28.227.103/24

Example: vlan ip igmp

Configure IGMP on VLAN 1:

ProCurve(cong)# vlan 1 ip igmp auto a1,a2 forward a3,a4 blocked a5,a6

ProCurve(cong)# ip igmp auto a1,a2 forward a3,a4 blocked a5,a6

Example: vlan ip igmp high-priority-forward

Configure high priority for IGMP traffic on VLAN 1:

ProCurve(cong)# vlan 1 ip igmp high-priority-forward

Example: vlan ip igmp high-priority-forward

Same as above command, but in the VLAN 1 context level:

ProCurve(vlan-1)# ip igmp high-priority-forward

Example: vlan ip igmp high-priority-forward

Return IGMP traffic to "normal" priority:

ProCurve(vlan 1)# no ip igmp high-priority-forward

Example: vlan tagged

Change the tagged ports in the above examples to No (or Auto, if GVRP is enabled):

ProCurve(cong)# no vlan 100 tagged a1-a5

Example: vlan tagged

Configure a voice VLAN with a VID of 10, and set the highest priority for all traffic on this VLAN:

ProCurve(cong)# vlan 10 qos priority 7

ProCurve(cong)# write memory

COMMAND DETAILS

owner (p. 643)hello-interval (p. 630)access-group (p. 618)

vlanCommand Line Interface Reference Guide