Product manual
■ ip -- Apply an IPv4 access list. (p. 633)
■ access-group -- Define the mirror port for diagnostic purposes (ASCII-STR) (p. 618)
■ monitor_mirror_ACL_dir < In > -- Define the mirror port for diagnostic purposes (p. 641)
■ mirror -- Mirror destination. (p. 639)
■ mirror_session_name -- Mirror destination name. (p. 639)
■ monitor_mirror_session_id < 1 to 4 > -- Mirror destination number. (p. 641)
■ vlan VLAN-ID name -- Set the VLAN's name (ASCII-STR) (p. 642)
■ [no] vlan VLAN-ID protocol -- Set a predefined protocol for the current VLAN. (p. 647)
■ protocol-group -- Enter a list of protocols for the current VLAN delimited by commas.
(ASCII-STR) (p. 647)
■ protocols < IPX | IPv4 | IPv6 | ... > -- Set a predefined protocol for the current VLAN. (p. 648)
■ [no] vlan VLAN-ID qos -- Set VLAN-based priority (p. 648)
■ dscp < 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use. (p. 628)
■ priority < 0 | 1 | 2 | ... > -- Specify priority to use. (p. 646)
■ [no] vlan VLAN-ID tagged -- Assign ports to current VLAN as tagged ([ethernet] PORT-LIST) (p.
651)
■ [no] vlan VLAN-ID untagged -- Assign ports to current VLAN as untagged ([ethernet] PORT-LIST)
(p. 653)
■ [no] vlan VLAN-ID voice -- Labels this VLAN as a Voice VLAN, allowing you to separate, prioritize,
and authenticate voice traffic moving through your network (p. 653)
■ [no] vlan VLAN-ID vrrp -- Enable/disable/configure VRRP operation on the VLAN (p. 654)
■ vrid < 1 to 255 > -- Configure a virtual router instance for the VLAN (p. 653)
■ advertise-interval < 1 to 255 > -- Set time interval (in seconds) between sending VRRP
advertisement messages (p. 621)
■ backup -- Designate the virtual router instance as a Backup (p. 625)
■ enable -- Enable/disable operation of the virtual router instance (p. 628)
■ owner -- Designate the virtual router instance as an Owner (Master) (p. 643)
■ preempt-delay-time < 1 to 600 > -- Enable the pre-emptive delay timer for the virtual router
instance (p. 645)
■ preempt-mode -- Enable/disable preempt mode for the virtual router instance (p. 646)
■ primary-ip-address -- Specify IP address the virtual router instance will use as a source in
VRRP advertisement messages (p. 646)
■ ip-addr -- Specify IP address. (IP-ADDR) (p. 633)
■ lowest -- Dynamically determine lowest IP address. (p. 637)
■ priority < 1 to 255 > -- Configure priority for the virtual router instance (p. 646)
■ virtual-ip-address -- Specify IP address to be supported by the virtual router instance (p.
653)
■ ip-addr -- Specify IP address/mask. (IP-ADDR/MASK-LENGTH) (p. 633)
EXAMPLES
Example: vlan name
Change VLAN 100's name to "Blue_Team" and add ports A1 - A5 as tagged members of the VLAN:
ProCurve(cong)# vlan 100 name Blue_Team
ProCurve(cong)# vlan 100 tagged a1-a5
Example: vlan default_vlan
Go to a different VLAN context level, such as to the default VLAN:
ProCurve(vlan-100)# vlan default_vlan
616© 2008 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide