Product manual

ManualsBrandsProCurve ManualsComputer equipment8212zl

611

612

613

614

615

616

617

618

619

620

■ override-interval < 500 to 6000 > -- Set the value inserted into the Override Interval field

of a LAN Prune Delay option on this interface (p. 643)

■ propagation-delay < 250 to 2000 > -- Set the value inserted into the LAN Prune Delay field

of a LAN Prune Delay option on this interface (p. 647)

■ ttl-threshold < 0 to 255 > -- Set the Time To Live in a PIM-DM State Refresh message at

which it is not forwarded on this interface (p. 652)

■ pim-sparse -- Enable/disable/configure PIM-SM protocol on the VLAN interface (p. 644)

■ dr-priority -- Set the priority value to use on the interface in the Designated Router election

process (p. 627)

■ hello-delay < 0 to 5 > -- Set the maximum time before a triggered PIM Hello message is

transmitted on this interface (p. 630)

■ hello-interval < 5 to 300 > -- Set the frequency at which PIM Hello messages are transmitted

on this interface (p. 630)

■ ip-addr -- Set the source IP address for the PIM-SM packets sent out on this interface (p.

633)

■ any -- Dynamically determine IP address. (p. 622)

■ ip-addr -- Specify IP address. (IP-ADDR) (p. 633)

■ lan-prune-delay -- Turn on/off the LAN Prune Delay Option on this interface (p. 637)

■ nbr-timeout < 60 to 8000 > -- Set the neighbour loss time interval for this interface (p. 642)

■ override-interval < 500 to 6000 > -- Set the value inserted into the Override Interval field

of a LAN Prune Delay option on this interface (p. 643)

■ propagation-delay < 250 to 2000 > -- Set the value inserted into the LAN Prune Delay field

of a LAN Prune Delay option on this interface (p. 647)

■ proxy-arp -- Enable/disable proxy ARP (p. 648)

■ rip -- Enable/disable/configure Routing Internet Protocol (RIP) on the VLAN interface (p. 650)

■ all -- Process the request for all IP addresses. (p. 621)

■ authentication-key -- Set RIP authentication key (maximum 16 characters). (p. 623)

■ auth-key-text -- Set RIP authentication key (maximum 16 characters). (OCTET-STR)

(p. 624)

■ authentication-type < none | text > -- Set authentication type used on this interface. (p.

624)

■ metric < 1 to 15 > -- Set metric for this interface. (p. 638)

■ poison-reverse -- Enable/disable poison reverse on this interface. (p. 645)

■ receive < V1-only | V2-only | V1-or-V2 | ... > -- Define RIP version for incoming packets.

(p. 649)

■ rip-compatible < V1-only | V2-only | V1-or-V2 > -- Define RIP version for incoming and

outgoing packets. (p. 650)

■ send < disabled | V1-only | V1-compatible-V2 | ... > -- Define RIP version for outgoing

packets. (p. 651)

■ authentication-key -- Set RIP authentication key (maximum 16 characters). (p. 623)

■ auth-key-text -- Set RIP authentication key (maximum 16 characters). (OCTET-STR) (p.

624)

■ authentication-type < none | text > -- Set authentication type used on this interface. (p. 624)

■ ip-addr -- Specify the IP address the request is for. (IP-ADDR) (p. 633)

■ authentication-key -- Set RIP authentication key (maximum 16 characters). (p. 623)

■ auth-key-text -- Set RIP authentication key (maximum 16 characters). (OCTET-STR)

(p. 624)

■ authentication-type < none | text > -- Set authentication type used on this interface. (p.

624)

■ metric < 1 to 15 > -- Set metric for this interface. (p. 638)

■ poison-reverse -- Enable/disable poison reverse on this interface. (p. 645)

■ receive < V1-only | V2-only | V1-or-V2 | ... > -- Define RIP version for incoming packets.

(p. 649)

vlanCommand Line Interface Reference Guide