Product manual

Default: 30
minttl
■ traceroute6 IPV6-ADDR minttl < 1 to 255 >
Minimum number of hops allowed for each probe packet sent along the
route. If the minttl value is greater than the actual number of hops,
the traceroute output displays only the hops equal to or greater than the
congured minttl threshold value.
If the minttl value is the same as the actual number of hops, only
the nal hop is displayed in the command output.
If the minttl value is less than the actual number of hops, all hops
to the destination host are displayed. <1-255>.
Range: < 1 to 255 >
Default: 1
■ traceroute6 HOST-NAME minttl < 1 to 255 >
Minimum number of hops allowed for each probe packet sent along the
route. If the minttl value is greater than the actual number of hops,
the traceroute output displays only the hops equal to or greater than the
congured minttl threshold value.
If the minttl value is the same as the actual number of hops, only
the nal hop is displayed in the command output.
If the minttl value is less than the actual number of hops, all hops
to the destination host are displayed. <1-255>.
Range: < 1 to 255 >
Default: 1
probes
■ traceroute6 IPV6-ADDR probes < 1 to 5 >
Number of times a traceroute is performed to locate the IPv6 device
at any hop in the route to the specied host before the operation
times out. <1-5>.
Range: < 1 to 5 >
Default: 3
■ traceroute6 HOST-NAME probes < 1 to 5 >
Number of times a traceroute is performed to locate the IPv6 device
at any hop in the route to the specied host before the operation
times out. <1-5>.
Range: < 1 to 5 >
Default: 3
timeout
■ traceroute6 IPV6-ADDR timeout < 1 to 120 >
Number of seconds within which a response is required from the IPv6
device at each hop in the route to the destination host before the
traceroute operation times out. <1-120>.
603© 2008 Hewlett-Packard Development Company, L.P.
traceroute6Command Line Interface Reference Guide