Product manual

telnet6-server

OVERVIEW

Category:

configPrimary context:

telnet-server (page 590)Related Commands

show console (page 465)

Usage: [no] telnet6-server

Description: Use at the global cong level to enable/disable the IPv6

telnet server on the switch.

For remote clients to use telnet, the switch must rst be

congured for IPv6. By default, telnet access is enabled.

Use 'show console' command to see the status of this function.

NOTES

Disabling Telnet Access

To disable inbound Telnet access completely, you must disable Telnet access

for both IPv6 and IPv4. The command for disabling Telnet4 access is

"no telnet-server".

To disable IPv6 Telnet access the command is "no telnet6-server".

COMMAND STRUCTURE