Product manual

Specify priority to use.
Supported Values:
■ 0
■ 1
■ 2
■ 3
■ 4
■ 5
■ 6
■ 7
protocol
■ svlan VLAN-ID protocol
Set a predened protocol for the current VLAN.
Next Available Options:
■ protocols < IPX | IPv4 | IPv6 | ... > -- Set a predefined protocol for the current VLAN. (p. 582)
■ protocol-group -- Enter a list of protocols for the current VLAN delimited by commas.
(ASCII-STR) (p. 582)
protocol-group
■ [no] svlan VLAN-ID protocol PROTOCOL-GROUP
Enter a list of protocols for the current VLAN delimited by commas.
protocols
■ [no] svlan VLAN-ID protocol < IPX | IPv4 | IPv6 | ... >
Set a predened protocol for the current VLAN.
Supported Values:
■ IPX -- IPX Protocol Group
■ IPv4 -- IP version 4 Protocol Group
■ IPv6 -- IP version 6 Protocol Group
■ ARP -- Address Resolution Protocol Group
■ Appletalk -- Appletalk Protocol Group
■ SNA -- System Network Architecture Protocol Group
■ NetBEUI -- Network BIOS Enhanced User Interface Protocol Group
qos
■ [no] svlan VLAN-ID qos
Usage: [no] qos [dscp <000000|000001...111111> | priority <0-7>]
Description: Set VLAN-based priority. The 'dscp' or 'priority' must
be specied if 'no' is not used. Using 'no' congures
the switch not to apply a VLAN priority override to this
VLAN's packets.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
582© 2008 Hewlett-Packard Development Company, L.P.
svlanCommand Line Interface Reference Guide