Product manual

Usage: connection-rate-lter unblock < host SRC-IP-ADDR | SRC-IP-ADDRESS/MASK >

[no] connection-rate-lter sensitivity <low|medium|high|aggressive>

Description: Re-enables access to a host or set of hosts that has been previously

blocked by the connection rate lter. Disabling or setting sensitivity

may have improved performance after rebooting the switch

Next Available Option:

■ unblock -- Resets a host previously blocked by the connection rate filter (p. 583)

dhcp

■ [no] svlan VLAN-ID ipv6 address dhcp

Congure a DHCPv6 client.

Next Available Option:

■ full -- Obtain IPv6 address & Configuration information from DHCPv6 server.(p. 578)

dhcp-bootp

■ svlan VLAN-ID ip address dhcp-bootp

Congure the interface to use DHCP/Bootp server to acquire parameters.

dhcp-snooping

■ [no] svlan VLAN-ID dhcp-snooping

direction

■ [no] svlan VLAN-ID ip access-group ACCESS-GROUP < in | out | connection-rate-filter | ... >

Supported Values:

■ in -- Match inbound packets

■ out -- Match outbound packets

■ connection-rate-filter -- Manage packet rates

■ vlan -- VLAN acl

dscp

■ svlan VLAN-ID qos dscp < 000000 | 000001 | 000010 | ... >

Specify DSCP policy to use.

Supported Values:

Binary formatted value from 000000 to 111111

enable

■ [no] svlan VLAN-ID ipv6 enable

Enable IPv6 on an interface and congures an automatically generated link-local addr.

svlanCommand Line Interface Reference Guide