Product manual

Next Available Options:

■ autoconfig -- Automatic address configuration.(p. 576)

■ dhcp -- Configure a DHCPv6 client.(p. 577)

■ ipv6-addr -- Configure a link-local IPv6 address. (IPV6-ADDR) (p. 579)

■ ipv6-addr/mask -- Configure IPv6 address represented in CIDR notation.

(IPV6-ADDR/PREFIX-LEN) (p. 579)

all

■ svlan VLAN-ID connection-rate-filter unblock all

Resets all previously blocked by the connection rate lter

■ svlan VLAN-ID monitor all < In | Out | Both >

Monitor all trafc.

Supported Values:

■ In -- Monitor all inbound traffic

■ Out -- Monitor all outbound traffic

■ Both -- Monitor all inbound and outbound traffic

Next Available Option:

■ mirror -- Mirror destination.(p. 580)

anycast

■ [no] svlan VLAN-ID ipv6 address IPV6-ADDR/PREFIX-LEN anycast

Address that is assigned to a set of interfaces that typically belong to different

nodes

auto

■ svlan VLAN-ID auto [ETHERNET] PORT-LIST

Usage: [no] auto [ethernet] PORT-LIST

Description: Cause each port identied in the port list to learn its

VLAN membership using the GARP VLAN Registration Protocol

(GVRP). This command is only valid when GVRP is enabled.

This is a VLAN context command. It can be called directly

from the VLAN context or follow the 'vlan VLAN-ID'

command.

autoconfig

■ [no] svlan VLAN-ID ipv6 address autoconfig

Automatic address conguration.

connection-rate-filter

■ svlan VLAN-ID connection-rate-filter

svlanCommand Line Interface Reference Guide