Product manual

dhcp-bootp -- Configure the interface to use DHCP/Bootp server to acquire parameters. (p.
577)
■
■ ip-addr -- Interface IP address/mask. (IP-ADDR/MASK-LENGTH) (p. 579)
■ [no] svlan VLAN-ID ipv6 -- Configure various IP parameters for the VLAN (p. 579)
■ address -- Set IPv6 parameters for communication within an IP network (p. 574)
■ autoconfig -- Automatic address configuration. (p. 576)
■ dhcp -- Configure a DHCPv6 client. (p. 577)
■ full -- Obtain IPv6 address & Configuration information from DHCPv6 server. (p. 578)
■ rapid-commit -- Obtain IPv6 address quickly from DHCPv6 server. (p. 583)
■ ipv6-addr -- Configure a link-local IPv6 address. (IPV6-ADDR) (p. 579)
■ link-local -- Configure a link-local IPv6 address. (p. 580)
■ ipv6-addr/mask -- Configure IPv6 address represented in CIDR notation.
(IPV6-ADDR/PREFIX-LEN) (p. 579)
■ anycast -- Address that is assigned to a set of interfaces that typically belong to different
nodes (p. 576)
■ eui-64 -- An IPv6 EUI-64 address that can be automatically configured on any interface
(p. 578)
■ enable -- Enable IPv6 on an interface and configures an automatically generated link-local addr.
(p. 577)
■ [no] svlan VLAN-ID jumbo -- Labels this VLAN as a Jumbo VLAN, allowing you to pass packets
up to 9220 bytes in size (p. 579)
■ [no] svlan VLAN-ID monitor -- Define either the VLAN is to be monitored or not (p. 580)
■ all < In | Out | Both > -- Monitor all traffic. (p. 576)
■ mirror -- Mirror destination. (p. 580)
■ mirror_session_name -- Mirror destination name. (p. 580)
■ monitor_mirror_session_id < 1 to 4 > -- Mirror destination number. (p. 581)
■ ip -- Apply an IPv4 access list. (p. 578)
■ access-group -- Define the mirror port for diagnostic purposes (ASCII-STR) (p. 574)
■ monitor_mirror_ACL_dir < In > -- Define the mirror port for diagnostic purposes (p. 581)
■ mirror -- Mirror destination. (p. 580)
■ mirror_session_name -- Mirror destination name. (p. 580)
■ monitor_mirror_session_id < 1 to 4 > -- Mirror destination number. (p. 581)
■ svlan VLAN-ID name -- Set the VLAN's name (ASCII-STR) (p. 581)
■ [no] svlan VLAN-ID protocol -- Set a predefined protocol for the current VLAN. (p. 582)
■ protocol-group -- Enter a list of protocols for the current VLAN delimited by commas.
(ASCII-STR) (p. 582)
■ protocols < IPX | IPv4 | IPv6 | ... > -- Set a predefined protocol for the current VLAN. (p. 582)
■ [no] svlan VLAN-ID qos -- Set VLAN-based priority (p. 582)
■ dscp < 000000 | 000001 | 000010 | ... > -- Specify DSCP policy to use. (p. 577)
■ priority < 0 | 1 | 2 | ... > -- Specify priority to use. (p. 581)
■ [no] svlan VLAN-ID tagged -- Assign ports to current VLAN as tagged ([ethernet] PORT-LIST) (p.
583)
■ [no] svlan VLAN-ID untagged -- Assign ports to current VLAN as untagged ([ethernet] PORT-LIST)
(p. 583)
■ [no] svlan VLAN-ID voice -- Labels this VLAN as a Voice VLAN, allowing you to separate, prioritize,
and authenticate voice traffic moving through your network (p. 583)
COMMAND DETAILS
monitor_mirror_session_id (p.
581)
forbid (p. 578)
full (p. 578)
access-group (p. 574)
address (p. 574)
name (p. 581)host (p. 578)all (p. 576)
priority (p. 581)ip (p. 578)anycast (p. 576)
573© 2008 Hewlett-Packard Development Company, L.P.
svlanCommand Line Interface Reference Guide