Product manual

Range: < 0 to 15 >
■ spanning-tree [ETHERNET] PORT-LIST priority < 0 to 255 >
Set port priority (the value is in range of 0-240 divided into steps of 16 that are
numbered from 0 to 15, default is step 8).
Range: < 0 to 255 >
■ spanning-tree priority < 0 to 65535 >
Set the device STP priority.
Range: < 0 to 65535 >
■ spanning-tree priority < 0 to 15 >
Set the device STP priority (the value is in range of 0-61440 divided into steps of
4096 that are numbered from 0 to 15, default is step 8).
Range: < 0 to 15 >
■ spanning-tree instance < 1 to 16 > priority < 0 to 15 >
Set the device priority for the MST instance (the value is in range of 0-61440 divided
into steps of 4096 that are numbered from 0 to 15, default is step 8).
Range: < 0 to 15 >
■ spanning-tree instance < 1 to 16 > [ETHERNET] PORT-LIST priority < 0 to 15 >
Set the port priority for the instance (the value is in range of 0-240 divided into
steps of 16 that are numbered from 0 to 15, default is step 8).
Range: < 0 to 15 >
pvst-filter
■ [no] spanning-tree [ETHERNET] PORT-LIST pvst-filter
Stop a specic port or ports from receiving and retransmitting PVST BPDUs. The command
indicates
which ports are not expected to receive any PVST BPDUs.
Default: Disabled on all ports.
pvst-protection
■ [no] spanning-tree [ETHERNET] PORT-LIST pvst-protection
Enables or disables the PVST protection feature on the port or range of ports specied.
The
command indicates which ports are not expected to receive any PVST BPDUs.
Default: Disabled on all ports
reset
■ spanning-tree pending reset
Copy active conguration to pending.
root-guard
■ [no] spanning-tree [ETHERNET] PORT-LIST root-guard
565© 2008 Hewlett-Packard Development Company, L.P.
spanning-treeCommand Line Interface Reference Guide