Product manual

forward-delay
■ spanning-tree forward-delay < 4 to 30 >
Set time the switch waits between transitioning from listening to learning and from
learning to forwarding states.
Range: < 4 to 30 >
global
■ spanning-tree [ETHERNET] PORT-LIST hello-time global
Use the globally congured hello-time value.
hello-time
■ spanning-tree [ETHERNET] PORT-LIST hello-time
Set message transmission interval (in sec.) on the port.
Next Available Options:
■ hello-time < 1 to 10 > -- Set message transmission interval (in sec.) on the port.(p. 556)
■ global -- Use the globally configured hello-time value.(p. 556)
■ spanning-tree [ETHERNET] PORT-LIST hello-time < 1 to 10 >
Set message transmission interval (in sec.) on the port.
Range: < 1 to 10 >
■ spanning-tree hello-time < 1 to 10 >
Set time between messages transmission when the switch is root.
Range: < 1 to 10 >
instance
■ spanning-tree instance
Usage: spanning-tree instance <ist|<1-16>> vlan VLAN-ID [VLAN-ID ...]
[no] spanning-tree instance <1-16>
[no] spanning-tree instance <ist|1-16> ...
Description: Create, delete or congure an MST instance.
The rst form of the command is used to create a new
instance or map VLAN(s) to an existent one. Each instance
must have at least one VLAN mapped to it. The VLANs
unmapped from other instances are automatically mapped to
the IST instance. Only IST VLANs can be directly mapped to
other instances. When VLANs are mapped to an instance they
are automatically unmapped from the instance they were
mapped to before. Any MSTP instance can have all the VLANs
congured in the switch. The second form of the command
deletes an instance. The IST instance cannot be deleted. The
third form of the command can be used to congure an existent
instance. Follow the third form of the command with '?' to
get a complete list of all the congurable parameters and
sub-commands.
556© 2008 Hewlett-Packard Development Company, L.P.
spanning-treeCommand Line Interface Reference Guide