Product manual
config-name
■ [no] spanning-tree config-name
Set the MST region conguration name (default is switch's MAC address).
Next Available Option:
■ config-name -- Specify the configuration name (maximum 32 characters). (ASCII-STR) (p. 555)
■ spanning-tree config-name CONFIG-NAME
Specify the conguration name (maximum 32 characters).
■ [no] spanning-tree pending config-name
Set the pending MST region conguration name (default is switch's MAC address).
Next Available Option:
■ config-name -- Specify the configuration name (maximum 32 characters). (ASCII-STR) (p. 555)
■ spanning-tree pending config-name CONFIG-NAME
Specify the conguration name (maximum 32 characters).
config-revision
■ spanning-tree config-revision < 0 to 65535 >
Set the MST region conguration revision number (default is 0).
Range: < 0 to 65535 >
■ spanning-tree pending config-revision < 0 to 65535 >
Set the pending MST region conguration revision number (default is 0).
Range: < 0 to 65535 >
force-version
■ spanning-tree force-version < STP-compatible | RSTP-operation >
Set Spanning Tree protocol compatibility mode.
Supported Values:
■ STP-compatible -- The protocol operates as STP on all ports.
■ RSTP-operation -- The protocol operates as Rapid STP on all ports except those ports where
a system that is using 802.1d Spanning Tree has been detected.
■ spanning-tree force-version < STP-compatible | RSTP-operation | MSTP-operation >
Set Spanning Tree protocol compatibility mode.
Supported Values:
■ STP-compatible -- The protocol operates as STP on all ports.
■ RSTP-operation -- The protocol operates as Rapid STP on all ports except those ports where
a system that is using 802.1d Spanning Tree has been detected.
■ MSTP-operation -- The protocol operates as Multiple STP on all ports where compatibility to
the old STP protocol versions is not required.
555© 2008 Hewlett-Packard Development Company, L.P.
spanning-treeCommand Line Interface Reference Guide