Product manual

■ mcheck -- Force the port to transmit RST BPDUs. (p. 558)
■ path-cost -- Set port's path cost value. (p. 558)
■ auto -- Use dynamic method of selecting a value for the path cost. (p. 554)
■ path-cost < 1 to 200000000 > -- Set port's path cost to the fixed value. (p. 558)
■ path-cost < 1 to 65535 > -- Set port's path cost to the fixed value. (p. 558)
■ point-to-point-mac < True | False | Auto > -- Set the administrative point-to-point status. (p.
560)
■ priority < 0 to 15 > -- Set port priority (the value is in range of 0-240 divided into steps of 16
that are numbered from 0 to 15, default is step 8). (p. 564)
■ pvst-filter -- Stop a specific port or ports from receiving and retransmitting PVST BPDUs. (p.
565)
■ pvst-protection -- Disable the specific port or ports if the port(s) receives PVST BPDUs. (p. 565)
■ root-guard -- Set port to ignore superior BPDUs to prevent it from becoming Root Port. (p. 565)
■ tcn-guard -- Set port to stop propagating received topology changes notifications and topology
changes to other ports. (p. 566)
■ spanning-tree port-list -- Configure the port-specific parameters of the spanning tree protocol for
individual ports ([ethernet] PORT-LIST) (p. 560)
■ mode < Norm | Fast | Uplink > -- Set spanning tree operation mode. (p. 558)
■ path-cost -- Set port's path cost value. (p. 558)
■ auto -- Use dynamic method of selecting a value for the path cost. (p. 554)
■ path-cost < 1 to 200000000 > -- Set port's path cost to the fixed value. (p. 558)
■ path-cost < 1 to 65535 > -- Set port's path cost to the fixed value. (p. 558)
■ priority < 0 to 255 > -- Set port priority (the value is in range of 0-240 divided into steps of 16
that are numbered from 0 to 15, default is step 8). (p. 564)
■ spanning-tree priority < 0 to 65535 > -- Set the device STP priority. (p. 564)
■ spanning-tree priority < 0 to 15 > -- Set the device STP priority (the value is in range of 0-61440
divided into steps of 4096 that are numbered from 0 to 15, default is step 8). (p. 564)
■ [no] spanning-tree trap < errant-bpdu > -- Enable/disable STP traps. (p. 566)
COMMAND DETAILS
port-list (p. 560)hello-time (p. 556)admin-edge-port (p. 553)
ports (p. 564)instance (p. 556)apply (p. 553)
priority (p. 564)ist (p. 557)auto (p. 554)
pvst-filter (p. 565)legacy-mode (p. 557)auto-edge-port (p. 554)
pvst-protection (p. 565)legacy-path-cost (p. 557)bpdu-filter (p. 554)
reset (p. 565)max-hops (p. 558)bpdu-protection (p. 554)
root-guard (p. 565)maximum-age (p. 558)bpdu-protection-timeout (p. 554)
tcn-guard (p. 566)mcheck (p. 558)clear-debug-counters (p. 554)
trap (p. 566)mode (p. 558)config-name (p. 555)
vlan (p. 566)MSTID (p. 558)config-revision (p. 555)
VLAN-ID-RANGE (p. 566)path-cost (p. 558)force-version (p. 555)
pending (p. 560)forward-delay (p. 556)
point-to-point-mac (p. 560)global (p. 556)
admin-edge-port
■ [no] spanning-tree [ETHERNET] PORT-LIST admin-edge-port
Set the administrative edge port status.
apply
■ spanning-tree pending apply
553© 2008 Hewlett-Packard Development Company, L.P.
spanning-treeCommand Line Interface Reference Guide