Product manual

Next Available Option:
■ mode < start-stop | stop-only > -- Specify how to initiate and terminate an accounting session.
(p. 40)
telnet
■ aaa authentication telnet
Usage: aaa authentication telnet <enable|login>
<primary-method> [<backup-method>]
Description: Congure authentication mechanism used to control telnet
access to the switch.
Parameters:
o enable - Congure access to privileged mode.
o login - Congure login access.
o <primary-method> - Species the primary authentication
method for access control. Use <TAB>
or <?> after you specify enable or login
to get a list of all available
primary authentication methods.
o <backup-method> - Species an authentication method
to use, if the primary authentication
method is not able to check user's
credentials.
Use <TAB> or <?> after you specify the
primary authentication method to get a list
of all available backup methods.
Next Available Options:
■ enable -- Configure access to the privileged mode commands.(p. 33)
■ login -- Configure login access to the switch.(p. 35)
tx-period
■ aaa port-access authenticator [ETHERNET] PORT-LIST tx-period < 1 to 65535 >
Set the period of time the switch waits until
retransmission of EAPOL PDU (default 30 sec.).
Range: < 1 to 65535 >
unauth-period
■ aaa port-access authenticator [ETHERNET] PORT-LIST unauth-period < 0 to 255 >
Set period of time the switch waits for authentication before moving the
port to the VLAN for unauthenticated clients.
Range: < 0 to 255 >
unauth-vid
■ [no] aaa port-access authenticator [ETHERNET] PORT-LIST unauth-vid
Congures VLAN where to keep port while there is an unauthenticated client connected
(not congured by default).
52© 2008 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide