Product manual

■ password-change-mgr -- Traps for management interface password change.(p. 532)
■ login-failure-mgr -- Traps for management interface login failure.(p. 531)
■ port-security -- Traps for port access authentication failure.(p. 532)
trap-source
■ [no] snmp-server trap-source
Usage: [no] snmp-server trap-source [IP-ADDR|loopback<0-7>]
Description: Specify the source ip-address policy for the trap pdu.
By default snmp trap pdu will contain the ip address of
the active interface on which trap will be sent. The default
behavior is in compliance to rfc-1517.
The no form of the command will revert to default behavior.
IP-ADDR -- ip-address specied will be used as the source ip
address in the generated trap.
loopback 0-7 -- lexicographically minimum congured ip address on the
specied interface will be used as the source ip
address in the generated trap pdu.
Next Available Options:
■ ip-addr -- IP Address for the source ip address field in the trap pdu. (IP-ADDR) (p. 531)
■ loopback < 0 to 7 > -- For the specified loopback interface, lexicographically minimum configured
ip address will be used as the source ip address in the trap pdu.(p. 531)
view
■ [no] snmp-server community COMMUNITY < Operator | Manager >
Usage: [no] snmp-server community ASCII-STR
[manager|operator] [restricted|unrestricted]
Description: Add/delete SNMP community.
Parameters:
o community ASCII-STR - Enter up to 32 characters to name an SNMP
community.
o <manager|operator> - manager - the community can access all MIB
objects; operator (default) - the community can access all except
the CONFIG MIB.
o <restricted|unrestricted> - unrestricted - any MIB variable that
has read/write access can be set; restricted (default) - MIB
variables cannot be set, only read.
Supported Values:
■ Operator -- The community can access all except the CONFIG MIB.
■ Manager -- The community can access all MIB objects.
write-access
■ [no] snmp-server community COMMUNITY < Restricted | Unrestricted | | ... >
534© 2008 Hewlett-Packard Development Company, L.P.
snmp-serverCommand Line Interface Reference Guide